本程序所用的原理圖下載: 點這里 ，單片機芯片使用的stc89c52
/*
*功能：定時器0實現信號交通燈
*
*日期：2013-05-07-08:41
*作者：徐冉
*特別說明：本程序代碼已經通過調試，僅供學習使用；
*
*/
/***********AT89C52-RC 單片機實驗板***********/
/*****************51hei-開發板*********************/
#include <reg52.h>
typedef unsigned int uint;
typedef unsigned char uchar;
sbit LED_hong = P1^0;//紅信號燈
sbit LED_lv = P1^2; //綠信號燈
sbit wela = P2^7;
sbit dula = P2^6;
uchar code table[] = {
0x3F, //"0"
0x06, //"1"
0x5B, //"2"
0x4F, //"3"
0x66, //"4"
0x6D, //"5"
0x7D, //"6"
0x07, //"7"
0x7F, //"8"
0x6F, //"9"
0x77, //"A"
0x7C, //"B"
0x39, //"C"
0x5E, //"D"
0x79, //"E"
0x71, //"F"
0x76, //"H"
0x38, //"L"
0x37, //"n"
0x3E, //"u"
0x73, //"P"
0x5C, //"o"
0x40, //"-"
0x00, //熄滅
0x00 //自定義
};
uchar num = 30, counter;
void init();
void display(uint num);
void delay(uint xms);
void main()
{
init();
while(1)
{
if(counter == 50)
{
counter = 0;
num--;
if(num == 0)
{
num = 30;
LED_hong = ~LED_hong;
LED_lv = ~LED_lv;
}
}
display(num);
}
}
void init()
{
LED_hong = 0;
LED_lv = 1;
TMOD = 0x01;
TH0 = 0xB8;
TL0 = 0x00;
TR0 = 1;
EA = 1;
ET0 = 1;
}
void display(uint num)
{
uchar shi, ge;
shi = num / 10 % 10;
ge = num % 10;
dula = 1;
P0 = table[shi];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfe;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 = table[ge];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfd;
wela = 0;
P0 = 0x00;
delay(1);
}
void delay(uint xms)
{
uint i, j;
for(i = xms; i > 0; i--)
for(j = 125; j > 0; j--);
}
void int_time0() interrupt 1
{
TH0 = 0xB8;
TL0 = 0x00;
counter++;
}