本程序所用的原理圖下載: 點這里 ，單片機芯片使用的stc89c52；找到數碼管的原理圖即可.這是一整個單片機開發板的電路圖其他的忽略.本程序keil工程文件下載: http://www.zg4o1577.cn/f/1602iic.rar
/*
*功能: 利用iic發送數據，在數碼管上顯示，并通過串口發生到上位機，
* 且在lcd1602上顯示"Han Zhu Ying Xue"
* "1754410821@qq.com";
*作者: 徐冉
*日期: 2013-05-29-22:21 2013-5-2919:15 - 22:17
*備注: 程序已經順利通過調試，耗時3小時。
*/
/*********51hei開發板***********/
/********AT89C52-RC MCU***********/
#include <reg52.h>
#define write_add 0xa0
#define read_add 0xa1
typedef unsigned int uint;
typedef unsigned char uchar;
sbit wela = P2^7;
sbit dula = P2^6;
//i2c
sbit SCL = P2^1;
sbit SDA = P2^0;
//LCD1602
sbit RS = P1^0;
sbit RW = P1^1;
sbit EN = P2^5;
sbit BUSY = P0^7;
uchar num, flag;
uchar code string_1[] = "Han Zhu Ying Xue";
uchar code string_2[] = "1754410821@qq.com";
uchar code table[] = {
0x3F, //"0"
0x06, //"1"
0x5B, //"2"
0x4F, //"3"
0x66, //"4"
0x6D, //"5"
0x7D, //"6"
0x07, //"7"
0x7F, //"8"
0x6F //"9"
};
/********************************************************************/
/**********************LCD1602底層驅動程序***************************/
/********************************************************************/
//delay: 延時xms
void delay(uint xms)
{
uchar i, j;
for(i = 0; i < xms; i++)
for(j = 0; j < 110; j++);
}
//wait: 判忙等待
void wait()
{
P0 = 0xff;
do
{
RS = 0;
RW = 1;
EN = 0;
EN = 1;
}while(BUSY == 1);
EN = 0;
}
//write:cmd 寫入命令
void write_cmd(uchar cmd)
{
RS = 0;
RW = 0;
EN = 0;
P0 = cmd;
EN = 1;
EN = 0;
}
//write:data 寫入數據
void write_data(uchar datas)
{
RS = 1;
RW = 0;
EN = 0;
P0 = datas;
EN = 1;
EN = 0;
}
//send:string 發送一串字符
void send_string(uchar* str)
{
while(*str != '\0')
{
write_data(*str++);
}
}
//lcd1602:init LCD1602 顯示初始化
void lcd_init()
{
delay(15);
write_cmd(0x38);
delay(5);
write_cmd(0x38);
delay(5);
write_cmd(0x38);
wait();
write_cmd(0x38); //設置16 * 2,5 * 7點陣
wait();
write_cmd(0x08);
wait();
write_cmd(0x01);//清屏
wait();
write_cmd(0x06);
wait();
write_cmd(0x0c); //開顯示
}
/********************************************************************/
/*******************I2C模擬通信及AT24C02底層驅動程序****************/
/********************************************************************/
//AT24C02
//delayus: 延時約5us
void delayus()
{
;;
}
//i2c:init I2C總線初始化
void i2c_init()
{
SCL = 1;
delayus();
SDA = 1;
delayus();
}
//lcd:start 起始信號
void start()
{
SCL = 1;
SDA = 1;
delayus();
SDA = 0;
delayus();
}
//i2c:stop 停止信號
void stop()
{
SCL = 1;
SDA = 0;
delayus();
SDA = 1;
delayus();
}
//i2c:ack 從機應答信號
void ack()
{
uchar i = 0;
//在SCL = 1時，讀取SDA的數據判忙
SCL = 1;
delayus();
while((SDA == 1)&& i < 250)
i++;
//判忙之后，等待發送數據/命令
SCL = 0;
delayus();
}
//nack: 主機非應答信號
void nack()
{
//主機發送非應答信號1
SCL = 1;
delayus();
SDA = 1;
delayus();
//等待發送數據/命令
SCL = 0;
delayus();
}
//write:byte 寫一個字節數據
void write_byte(uchar date)
{ //從最高位發送
uchar i, temp;
temp = date;
for(i = 0; i < 8; i++)
{
temp <<= 1;
SCL = 0;
delayus();
SDA = CY;
delayus();
SCL = 1;
delayus();
SCL = 0;
delayus();
}
//等待從機應答
SCL = 0;
delayus();
SDA = 1;//置1,等待從機應答0
delayus();
}
//read:byte 讀一個字節數據
uchar read_byte()
{
uchar i, j, k;
SCL = 0;
delayus();
for(i = 0; i < 8; i++)
{
SCL = 1;
delayus();
j = SDA;
k = (k << 1) | j;
delayus();
SCL = 0;
delayus();
}
delayus();
return (k);
}
//write:AT24C02 寫AT24C02
void write_c02(uchar address, uchar date)
{
start();
write_byte(write_add);
ack();
write_byte(address);
ack();
write_byte(date);
ack();
stop();
delay(12);
}
//read:AT24C02 讀AT24C02
uchar read_c02(uchar add)
{
uchar date = 0;
start();
write_byte(write_add);
ack();
write_byte(add);
ack();
start();
write_byte(read_add);
ack();
date = read_byte();
nack();
return (date);
}
//display: 數碼管顯示程序
void display(uchar num)
{
uchar bai, shi, ge;
bai = num / 100 % 10;
shi = num / 10 % 10;
ge = num % 10;
dula = 1;
P0 = table[bai];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfe;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 = table[shi];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfd;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 = table[ge];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfb;
wela = 0;
P0 = 0x00;
delay(1);
}
/********************************************************************/
/*************************UART串口通信******************************/
/********************************************************************/
//uart:init UART初始化
void uart_init()
{
TMOD = 0x20;
TH1 = 0xFD; //9600bps/s
TL1 = 0xFD;
TR1 = 1;
SM0 = 0;
SM1 = 1;
REN = 1;
EA = 1;
ES = 1;
}
//main: 主程序
void main(void)
{
i2c_init();
lcd_init();
uart_init();
//LCD1602
write_cmd(0x80);
send_string(string_1);
write_cmd(0x80 + 0x40);
send_string(string_2);
//AT24C02
write_c02(0x0a, 0xaa);
num = read_c02(0x0a);
while(1)
{
display(num);
if(flag == 1)
{
ES = 0;
SBUF = num;
while(!TI);
TI = 0;
flag = 0;
ES = 1;
}
}
}
//UART:INT 串口中斷程序
void uart_int() interrupt 4
{
RI = 0;
num = SBUF;
flag = 1;
}