K20_Lab_Board_V4.2綜合測試程序

k20綜合測試程序





源程序：

1. /*
   
2. * main implementation: use this 'C' sample to create your own application
   
3. *
   
4. */
   
5. 
   
6. 
   
7. #include "derivative.h" /* include peripheral declarations */
   
8. #include "System.h" /* include peripheral declarations */
   
9. #include "ADC.h" /* include peripheral declarations */
   
10. #include "UART0.h" /* include peripheral declarations */
    
11. #include "Beep.h" /* include peripheral declarations */
    
12. //#include "LED.h"  /*LED configure*/
    
13. #include "MMA8451Q.h"/*MMA8451Q */
    
14. #include "PIT.h"
    
15. 
    
16. unsigned int ADC_Result;
    
17. unsigned char MMA8451_XYZ_CFG;
    
18. 
    
19. unsigned char MMA8451_X_MSB,MMA8451_X_LSB;
    
20. unsigned char MMA8451_Y_MSB,MMA8451_Y_LSB;
    
21. unsigned char MMA8451_Z_MSB,MMA8451_Z_LSB;
    
22. 
    
23. unsigned int temperature_value,photo_value,ADC_value;
    
24. 
    
25. unsigned char show[6];
    
26. extern unsigned char flag_measure;
    
27. 
    
28. int main(void)
    
29. {
    
30.         LED_Init();       
    
31.         KEY_Init();
    
32.         SMG_Init();
    
33.         Beep_Init();
    
34.         ADC_Init();
    
35.         UART0_Init();
    
36.         FTM2_Init();
    
37.         PIT_init(0x01);  //1ms interval interrupt
    
38.         MMA8451_Init();  //initial MMA8451 g sensor
    
39.         EN_Init();
    
40.        
    
41.         for(;;)
    
42.         {          
    
43.                 //potentiometer control  beep
    
44.                 ADC_channel_potentiometer();
    
45.                 ADC_value=ADC1_TR_DATA();
    
46.                 Beep_setup(ADC_value);
    
47.                 if(flag_measure==1)
    
48.                 {
    
49.                         flag_measure=0;
    
50.                     //temperature sensor
    
51.                     ADC_channel_temperature();
    
52.                     delayms(0x01);
    
53.                     temperature_value=ADC1_TR_DATA();
    
54.                    
    
55.                     photo_value=ADC0_TR_DATA();
    
56.                
    
57.                     //SMG show data store
    
58.                     data_to_array(temperature_value,photo_value,show);
    
59.                 }               
    
60.         }
    
61.        
    
62.         return 0;
    
63. }
    

復制代碼

全部資料下載地址（附帶串口工具）：
K20_Lab_Board_V4.2.zip (3.34 MB, 下載次數: 6)

2017-5-15 20:40 上傳

點擊文件名下載附件
下載積分: 黑幣 -5