之前自己用這個模塊的時候也找了很多了歷程來測試，但是都是沒有通過，最后得出的結論是spi通信的問題，，自己也懶得去找問題，，所以就擱置了現在把調試通過的程序拿來分享給大家，可以讀卡的，其他功能需要自己開發哦
單片機源程序如下:
- #include "lpcreg.h"
- #include "main.h"
- #include "mfrc522.h"
- #include <STDIO.H>
- #include <string.h>
- unsigned char code data1[16] = {0x12,0x34,0x56,0x78,0xED,0xCB,0xA9,0x87,0x12,0x34,0x56,0x78,0x01,0xFE,0x01,0xFE};
- //M1卡的某一塊寫為如下格式，則該塊為錢包，可接收扣款和充值命令
- //4字節金額（低字節在前）＋4字節金額取反＋4字節金額＋1字節塊地址＋1字節塊地址取反＋1字節塊地址＋1字節塊地址取反
- unsigned char code data2[4] = {0,0,0,0x01};
- unsigned char code DefaultKey[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
- unsigned char g_ucTempbuf[20];
- void delay1(unsigned int z)
- {
- unsigned int x,y;
- for(x=z;x>0;x--)
- for(y=110;y>0;y--);
- }
- void main( )
- {
- unsigned char status,i;
- unsigned int temp;
- InitializeSystem( );
- PcdReset();
- PcdAntennaOff();
- PcdAntennaOn();
- while (1)
- {
-
- status = PcdRequest(PICC_REQALL, g_ucTempbuf);//尋卡
- if (status != MI_OK)
- {
- InitializeSystem( );
- PcdReset();
- PcdAntennaOff();
- PcdAntennaOn();
- continue;
- }
-
- printf("讀出的卡的類型:");
- for(i=0;i<2;i++)
- {
- temp=g_ucTempbuf[i];
- printf("%X",temp);
-
-
- }
-
- status = PcdAnticoll(g_ucTempbuf);//防沖撞
- if (status != MI_OK)
- { continue; }
-
- ////////以下為超級終端打印出的內容////////////////////////
-
- printf("卡序列號："); //超級終端顯示,
- for(i=0;i<4;i++)
- {
- temp=g_ucTempbuf[i];
- printf("%X",temp);
-
- }
- ///////////////////////////////////////////////////////////
- status = PcdSelect(g_ucTempbuf);//選定卡片
- if (status != MI_OK)
- { continue; }
-
- status = PcdAuthState(PICC_AUTHENT1A, 1, DefaultKey, g_ucTempbuf);//驗證卡片密碼
- if (status != MI_OK)
- { continue; }
-
- status = PcdWrite(1, data1);//寫塊
- if (status != MI_OK)
- { continue; }
- while(1)
- {
- status = PcdRequest(PICC_REQALL, g_ucTempbuf);//尋卡
- if (status != MI_OK)
- {
- InitializeSystem( );
- PcdReset();
- PcdAntennaOff();
- PcdAntennaOn();
- continue;
- }
- status = PcdAnticoll(g_ucTempbuf);//防沖撞
- if (status != MI_OK)
- { continue; }
- status = PcdSelect(g_ucTempbuf);//選定卡片
- if (status != MI_OK)
- { continue; }
-
- status = PcdAuthState(PICC_AUTHENT1A, 1, DefaultKey, g_ucTempbuf);//驗證卡片密碼
- if (status != MI_OK)
- { continue; }
- status = PcdValue(PICC_DECREMENT,1,data2);//扣款
- if (status != MI_OK)
- { continue; }
-
- status = PcdBakValue(1, 2);//塊備份
- if (status != MI_OK)
- { continue; }
-
- status = PcdRead(2, g_ucTempbuf);//讀塊
- if (status != MI_OK)
- { continue; }
- printf("此卡的讀塊："); //超級終端顯示,
- for(i=0;i<16;i++)
- {
- temp=g_ucTempbuf[i];
- printf("%X",temp);
-
- }
- printf("\n");
- LED_GREEN = 0;
- delay1(100);
- LED_GREEN = 1;
- delay1(100);
- LED_GREEN = 0;
- delay1(200);
- LED_GREEN = 1;
- PcdHalt();
- }
- }
- }
- /////////////////////////////////////////////////////////////////////
- //系統初始化
- /////////////////////////////////////////////////////////////////////
- void InitializeSystem()
- {
- P0M1 = 0x0; P0M2 = 0x0;
- P1M1 = 0x0; P1M2 = 0x0;
- P3M1 = 0x0; P3M2 = 0xFF;
- P0 = 0xFF; P1 = 0xFF; P3 = 0xFF;P2 = 0xFF;
- TMOD=0x21; //設T0為方式1，GATE=1；
- SCON=0x50;
- TH1=0xFD; //波特率為4800bps
- TL1=0xFD;
- // TH1=0XE0; //9600
- ……………………
- …………限于本文篇幅 余下代碼請從51黑下載附件…………
所有資料51hei提供下載:
測試通過程序.zip
(95.54 KB, 下載次數: 170)
2017-9-27 18:33 上傳
點擊文件名下載附件
|
