里面還有stm32的例程.
IIC方式的OLED顯示屏資料(SSD1306)，里面有 用51單片機和stm32單片機還有Arduino驅動oled的例程：
IIC-OLED顯示屏資料(SSD1306).rar
(7.84 MB, 下載次數: 793)
2017-2-13 16:56 上傳
點擊文件名下載附件
部分程序預覽51的：
- /************************************************************************************
- * Copyright (c), 2013, HelTec Automatic Technology co.,LTD.
- * All rights reserved.
- * Email: cn.heltec@gmail.com
- * WebShop: heltec.taobao.com
- *
- * File name: LQ12864.h
- * Project : OLED
- * Processor: STC89C52
- * Compiler : Keil C51 Compiler
- *
- * Author : 小林
- * Version: 1.00
- * Date : 2013.8.8
- * Email : hello14blog@gmail.com
- * Modification: none
- *
- * Description:128*64點整OLED模塊驅動文件
- *
- * Others: none;
- *
- * Function List:
- *
- * 1. void delay(unsigned int z) -- 延時函數,毫秒
- * 2. void IIC_Start() -- 開啟I2C總線
- * 3. void IIC_Stop() -- 關閉I2C總線
- * 4. void Write_IIC_Byte(unsigned char IIC_Byte) -- 通過I2C總線寫一個byte的數據
- * 5. void OLED_WrDat(unsigned char dat) -- 向OLED屏寫數據
- * 6. void OLED_WrCmd(unsigned char cmd) -- 向OLED屏寫命令
- * 7. void OLED_Set_Pos(unsigned char x, unsigned char y) -- 設置顯示坐標
- * 8. void OLED_Fill(unsigned char bmp_dat) -- 全屏顯示(顯示BMP圖片時才會用到此功能)
- * 9. void OLED_CLS(void) -- 復位/清屏
- * 10. void OLED_Init(void) -- OLED屏初始化程序，此函數應在操作屏幕之前最先調用
- * 11. void OLED_P6x8Str(unsigned char x, y,unsigned char ch[]) -- 6x8點整，用于顯示ASCII碼的最小陣列，不太清晰
- * 12. void OLED_P8x16Str(unsigned char x, y,unsigned char ch[]) -- 8x16點整，用于顯示ASCII碼，非常清晰
- * 13.void OLED_P16x16Ch(unsigned char x, y, N) -- 16x16點整，用于顯示漢字的最小陣列，可設置各種字體、加粗、傾斜、下劃線等
- * 14.void Draw_BMP(unsigned char x0, y0,x1, y1,unsigned char BMP[]) -- 將128x64像素的BMP位圖在取字軟件中算出字表，然后復制到codetab中，此函數調用即可
- *
- * History: none;
- *
- *************************************************************************************/
- #include "reg51.h"
- // ------------------------------------------------------------
- // IO口模擬I2C通信
- // SCL接P1^3
- // SDA接P1^2
- // ------------------------------------------------------------
- sbit SCL=P1^1; //串行時鐘
- sbit SDA=P1^0; //串行數據
- #define high 1
- #define low 0
- #define Brightness 0xCF
- #define X_WIDTH 128
- #define Y_WIDTH 64
- /*********************OLED驅動程序用的延時程序************************************/
- void delay(unsigned int z)
- {
- unsigned int x,y;
- for(x=z;x>0;x--)
- for(y=110;y>0;y--);
- }
- /**********************************************
- //IIC Start
- **********************************************/
- void IIC_Start()
- {
- SCL = high;
- SDA = high;
- SDA = low;
- SCL = low;
- }
- /**********************************************
- //IIC Stop
- **********************************************/
- void IIC_Stop()
- {
- SCL = low;
- SDA = low;
- SCL = high;
- SDA = high;
- }
- /**********************************************
- // 通過I2C總線寫一個字節
- **********************************************/
- void Write_IIC_Byte(unsigned char IIC_Byte)
- {
- unsigned char i;
- for(i=0;i<8;i++)
- {
- if(IIC_Byte & 0x80)
- SDA=high;
- else
- SDA=low;
- SCL=high;
- SCL=low;
- IIC_Byte<<=1;
- }
- SDA=1;
- SCL=1;
- SCL=0;
- }
- /*********************OLED寫數據************************************/
- void OLED_WrDat(unsigned char IIC_Data)
- {
- IIC_Start();
- Write_IIC_Byte(0x78);
- Write_IIC_Byte(0x40); //write data
- Write_IIC_Byte(IIC_Data);
- IIC_Stop();
- }
- /*********************OLED寫命令************************************/
- void OLED_WrCmd(unsigned char IIC_Command)
- {
- IIC_Start();
- Write_IIC_Byte(0x78); //Slave address,SA0=0
- Write_IIC_Byte(0x00); //write command
- Write_IIC_Byte(IIC_Command);
- IIC_Stop();
- }
- /*********************OLED 設置坐標************************************/
- void OLED_Set_Pos(unsigned char x, unsigned char y)
- {
- OLED_WrCmd(0xb0+y);
- OLED_WrCmd(((x&0xf0)>>4)|0x10);
- OLED_WrCmd((x&0x0f)|0x01);
- }
- /*********************OLED全屏************************************/
- void OLED_Fill(unsigned char bmp_dat)
- {
- unsigned char y,x;
- for(y=0;y<8;y++)
- {
- OLED_WrCmd(0xb0+y);
- OLED_WrCmd(0x01);
- OLED_WrCmd(0x10);
- for(x=0;x<X_WIDTH;x++)
- OLED_WrDat(bmp_dat);
- }
- }
- /*********************OLED復位************************************/
- void OLED_CLS(void)
- {
- unsigned char y,x;
- for(y=0;y<8;y++)
- {
- OLED_WrCmd(0xb0+y);
- OLED_WrCmd(0x01);
- OLED_WrCmd(0x10);
- for(x=0;x<X_WIDTH;x++)
- OLED_WrDat(0);
- }
- }
- /*********************OLED初始化************************************/
- void OLED_Init(void)
- {
- delay(500);//初始化之前的延時很重要！
- OLED_WrCmd(0xae);//--turn off oled panel
- OLED_WrCmd(0x00);//---set low column address
- OLED_WrCmd(0x10);//---set high column address
- OLED_WrCmd(0x40);//--set start line address Set Mapping RAM Display Start Line (0x00~0x3F)
- OLED_WrCmd(0x81);//--set contrast control register
- OLED_WrCmd(Brightness); // Set SEG Output Current Brightness
- OLED_WrCmd(0xa0);//--Set SEG/Column Mapping 0xa0左右反置 0xa1正常
- OLED_WrCmd(0xc0);//Set COM/Row Scan Direction 0xc0上下反置 0xc8正常
- OLED_WrCmd(0xa6);//--set normal display
- OLED_WrCmd(0xa8);//--set multiplex ratio(1 to 64)
- OLED_WrCmd(0x3f);//--1/64 duty
- OLED_WrCmd(0xd3);//-set display offset Shift Mapping RAM Counter (0x00~0x3F)
- OLED_WrCmd(0x00);//-not offset
- OLED_WrCmd(0xd5);//--set display clock divide ratio/oscillator frequency
- OLED_WrCmd(0x80);//--set divide ratio, Set Clock as 100 Frames/Sec
- OLED_WrCmd(0xd9);//--set pre-charge period
- OLED_WrCmd(0xf1);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
- OLED_WrCmd(0xda);//--set com pins hardware configuration
- OLED_WrCmd(0x12);
- OLED_WrCmd(0xdb);//--set vcomh
- OLED_WrCmd(0x40);//Set VCOM Deselect Level
- OLED_WrCmd(0x20);//-Set Page Addressing Mode (0x00/0x01/0x02)
- OLED_WrCmd(0x02);//
- OLED_WrCmd(0x8d);//--set Charge Pump enable/disable
- OLED_WrCmd(0x14);//--set(0x10) disable
- OLED_WrCmd(0xa4);// Disable Entire Display On (0xa4/0xa5)
- OLED_WrCmd(0xa6);// Disable Inverse Display On (0xa6/a7)
- OLED_WrCmd(0xaf);//--turn on oled panel
- OLED_Fill(0x00); //初始清屏
- OLED_Set_Pos(0,0);
- }
- /***************功能描述：顯示6*8一組標準ASCII字符串 顯示的坐標（x,y），y為頁范圍0～7****************/
- void OLED_P6x8Str(unsigned char x, y,unsigned char ch[])
- {
- unsigned char c=0,i=0,j=0;
- while (ch[j]!='\0')
- {
- c =ch[j]-32;
- if(x>126){x=0;y++;}
- OLED_Set_Pos(x,y);
- for(i=0;i<6;i++)
- OLED_WrDat(F6x8[c][i]);
- x+=6;
- j++;
- }
- }
- /*******************功能描述：顯示8*16一組標準ASCII字符串 顯示的坐標（x,y），y為頁范圍0～7****************/
- void OLED_P8x16Str(unsigned char x, y,unsigned char ch[])
- {
- unsigned char c=0,i=0,j=0;
- while (ch[j]!='\0')
- {
- c =ch[j]-32;
- if(x>120){x=0;y++;}
- OLED_Set_Pos(x,y);
- for(i=0;i<8;i++)
- OLED_WrDat(F8X16[c*16+i]);
- OLED_Set_Pos(x,y+1);
- for(i=0;i<8;i++)
- OLED_WrDat(F8X16[c*16+i+8]);
- x+=8;
- j++;
- }
- }
- /*****************功能描述：顯示16*16點陣 顯示的坐標（x,y），y為頁范圍0～7****************************/
- void OLED_P16x16Ch(unsigned char x, y, N)
- {
- unsigned char wm=0;
- unsigned int adder=32*N;
- OLED_Set_Pos(x , y);
- for(wm = 0;wm < 16;wm++)
- {
- OLED_WrDat(F16x16[adder]);
- adder += 1;
- }
- OLED_Set_Pos(x,y + 1);
- for(wm = 0;wm < 16;wm++)
- {
- OLED_WrDat(F16x16[adder]);
- adder += 1;
- }
- }
- /***********功能描述：顯示顯示BMP圖片128×64起始點坐標(x,y),x的范圍0～127，y為頁的范圍0～7*****************/
- void Draw_BMP(unsigned char x0, y0,x1, y1,unsigned char BMP[])
- {
- unsigned int j=0;
- unsigned char x,y;
- if(y1%8==0) y=y1/8;
- else y=y1/8+1;
- for(y=y0;y<y1;y++)
- {
- OLED_Set_Pos(x0,y);
- for(x=x0;x<x1;x++)
- {
- OLED_WrDat(BMP[j++]);
- }
- }
- }
|
[復制鏈接]
