C語言函數聲明報錯error C141: syntax error near '*', expected ')'

ID:1111671 · 發表于 2024-2-29 19:08

#ifndef __W25Q32_H_
#define __W25Q32_H_

#include "main.h"

#define PAGESIZE    256//一頁最多輸入256字節

//SPI IO控制
#define SPI_SCL_1(_HANDLE_)             ( GPIO_WritePin((_HANDLE_)->uSCL_Port, (_HANDLE_)->uSCL_Pin, 1))
#define SPI_SCL_0(_HANDLE_)             ( GPIO_WritePin((_HANDLE_)->uSCL_Port, (_HANDLE_)->uSCL_Pin, 0))

#define SPI_MOSI_1(_HANDLE_)       ( GPIO_WritePin((_HANDLE_)->uMOSI_Port, (_HANDLE_)->uMOSI_Pin, 1))
#define SPI_MOSI_0(_HANDLE_)       ( GPIO_WritePin((_HANDLE_)->uMOSI_Port, (_HANDLE_)->uMOSI_Pin, 0))

#define SPI_MISO_1(_HANDLE_)       ( GPIO_WritePin((_HANDLE_)->uMISO_Port, (_HANDLE_)->uMISO_Pin, 1))
#define SPI_MISO_0(_HANDLE_)       ( GPIO_WritePin((_HANDLE_)->uMISO_Port, (_HANDLE_)->uMISO_Pin, 0))

#define SPI_CS_1(_HANDLE_)             ( GPIO_WritePin((_HANDLE_)->uCS_Port, (_HANDLE_)->uCS_Pin, 1))
#define SPI_CS_0(_HANDLE_)             ( GPIO_WritePin((_HANDLE_)->uCS_Port, (_HANDLE_)->uCS_Pin, 0))

#define SPI_MISO_R(_HANDLE_)       ( GPIO_ReadPin((_HANDLE_)->uMISO_Port, (_HANDLE_)->uMISO_Pin))

extern void  vW25Q32_Init(SPI_ObjectTypedef * hSPIx,
                                                                     uint8_t          uSCL_Port,
                                                                     uint8_t          uSCL_Pin ,

               uint8_t          uMOSI_Port,
               uint8_t          uMOSI_Pin ,

               uint8_t          uMISO_Port,
               uint8_t          uMISO_Pin ,

                                                                     uint8_t          uCS_Port,
               uint8_t          uCS_Pin);

//獲取Flash ID
extern uint32_t W25Q32_Read_ID(SPI_ObjectTypedef * hSPIx);
//寫使能（啟動）
extern void W25Q32_Write_Enable(SPI_ObjectTypedef * hSPIx);
//等待保護(等待擦除或寫入操作，直到操作完成結束)
extern void W25Q32_Wait_End(SPI_ObjectTypedef * hSPIx);
//讀操作，*buf為內容，addr為地址，pagesize為要讀出的字節數
extern void W25Q32_Read_Page(SPI_ObjectTypedef * hSPIx, uint8_t *buf,uint32_t addr,uint8_t pagesize);
//芯片擦除，非易失存儲器，寫數據前應該擦除操作
extern void W25Q32_Delete(SPI_ObjectTypedef * hSPIx);
//頁寫操作,*buf為內容，addr為地址，pagesize為寫入字節數必須小于256個
extern void W25Q32_Write_Page(SPI_ObjectTypedef * hSPIx,uint8_t *buf, uint32_t addr,uint8_t pagesize);

#endif

Core\W25Q32.h(25): error C141: syntax error near '*', expected ')'
Core\W25Q32.h(39): error C141: syntax error near '*', expected ')'
Core\W25Q32.h(41): error C141: syntax error near '*', expected ')'
Core\W25Q32.h(43): error C141: syntax error near '*', expected ')'
Core\W25Q32.h(45): error C141: syntax error near '*', expected ')'
Core\W25Q32.h(47): error C141: syntax error near '*', expected ')'
Core\W25Q32.h(49): error C141: syntax error near '*', expected ')'

想問一下，為什么每個聲明語句都有報錯

ID:161164 · 發表于 2024-2-29 20:59

要加分行符

extern void vW25Q32_Init(SPI_ObjectTypedef * hSPIx, \
uint8_t uSCL_Port, \
uint8_t uSCL_Pin, \
uint8_t uMOSI_Port, \
uint8_t uMOSI_Pin, \
uint8_t uMISO_Port, \
uint8_t uMISO_Pin, \
uint8_t uCS_Port, \
uint8_t uCS_Pin);

復制代碼

ID:883242 · 發表于 2024-3-1 16:54

這種#define不太好，inline更好一些。比如：
#define SPI_SCL_1(_HANDLE_) ( GPIO_WritePin((_HANDLE_)->uSCL_Port, (_HANDLE_)->uSCL_Pin, 1))
我會寫成：
inline void SPI_SCL_1(_HANDLE_) { GPIO_WritePin((_HANDLE_)->uSCL_Port, (_HANDLE_)->uSCL_Pin, 1))}

不過雖然編譯器都支持inline，但是這并不是c語言標準關鍵字，要查編譯器手冊才可以。

帳號		自動登錄	找回密碼
密碼			立即注冊

久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

C語言函數聲明報錯error C141: syntax error near '*', expected ')'