編譯錯誤error: At end of source: #18: expected a ")"

ID:1060439 · 發表于 2023-1-7 14:55

void rt_fs00603a_init(void)
{
rt_thread_t tid;

fs00603a_mutex = rt_mutex_create("fs00603amt", RT_IPC_FLAG_PRIO);
RT_ASSERT(fs00603a_mutex != RT_NULL);

#ifdef RT_USING_HEAP
tid = rt_thread_create("fs00603a",
fs00603a_thread_entry,
RT_NULL,
RT_FS00603A_THREAD_STACK_SIZE,
RT_FS00603A_THREAD_PRIORITY,
20);
RT_ASSERT(tid != RT_NULL);
fs00603a_rx_sem = rt_sem_create("fsrxsem", 0, RT_IPC_FLAG_FIFO);
#else
rt_err_t result;
tid = &bt_thread;
result = rt_thread_init(tid,
"fs00603",
fs00603a_thread_entry,
RT_NULL,
bt_stack,
sizeof(bt_stack),
RT_FS00603A_THREAD_PRIORITY,
20);
RT_ASSERT(result == RT_EOK);
#endif

rt_thread_startup(tid);
}

編譯后報以下錯誤
error: At end of source: #18: expected a ")"

此程序在另一臺電腦上是可以編譯通過的，設置也是一樣，版本也一樣。

ID:277550 · 發表于 2023-1-8 08:45

檢查文件編碼

ID:1060439 · 發表于 2023-1-10 09:11

謝謝你！

ID:1078332 · 發表于 2023-6-5 20:37

void rt_fs00603a_init(void)
{
rt_thread_t tid;

fs00603a_mutex = rt_mutex_create("fs00603amt", RT_IPC_FLAG_PRIO);
RT_ASSERT(fs00603a_mutex != RT_NULL);

#ifdef RT_USING_HEAP
tid = rt_thread_create("fs00603a",
                        fs00603a_thread_entry,
                        RT_NULL,
                        RT_FS00603A_THREAD_STACK_SIZE,
                        RT_FS00603A_THREAD_PRIORITY,
                        20);
RT_ASSERT(tid != RT_NULL);
fs00603a_rx_sem = rt_sem_create("fsrxsem", 0, RT_IPC_FLAG_FIFO);
#else
rt_err_t result;
static rt_uint8_t fs00603a_stack[RT_FS00603A_THREAD_STACK_SIZE];
tid = rt_thread_create(&tid,
                        "fs00603",
                        fs00603a_thread_entry,
                        RT_NULL,
                        fs00603a_stack,
                        sizeof(fs00603a_stack),
                        RT_FS00603A_THREAD_PRIORITY,
                        20);
RT_ASSERT(tid != RT_NULL);
#endif

rt_thread_startup(tid);
}

ID:1078332 · 發表于 2023-6-5 20:37

void rt_fs00603a_init(void) { rt_thread_t tid; fs00603a_mutex = rt_mutex_create("fs00603amt", RT_IPC_FLAG_PRIO); RT_ASSERT(fs00603a_mutex != RT_NULL); #ifdef RT_USING_HEAP tid = rt_thread_create("fs00603a", fs00603a_thread_entry, RT_NULL, RT_FS00603A_THREAD_STACK_SIZE, RT_FS00603A_THREAD_PRIORITY, 20); RT_ASSERT(tid != RT_NULL); fs00603a_rx_sem = rt_sem_create("fsrxsem", 0, RT_IPC_FLAG_FIFO); #else rt_err_t result; static rt_uint8_t fs00603a_stack[RT_FS00603A_THREAD_STACK_SIZE]; tid = rt_thread_create(&tid, "fs00603", fs00603a_thread_entry, RT_NULL, fs00603a_stack, sizeof(fs00603a_stack), RT_FS00603A_THREAD_PRIORITY, 20); RT_ASSERT(tid != RT_NULL); #endif rt_thread_startup(tid); }

ID:1078332 · 發表于 2023-6-5 20:39

在 #else 條件分支內對 tid 進行了非法賦值。bt_thread 的類型是 struct rt_thread，而不是 rt_thread_t。
在 #else 條件分支內對 tid 進行了非法初始化。tid 的類型是 rt_thread_t，&bt_thread 并不符合 rt_thread_t 的定義。
在 #else 條件分支內對 bt_stack 和 sizeof(bt_stack) 進行了非法使用。這兩個變量在這個條件分支里沒有定義，應該使用正確的線程堆棧變量和大小。

ID:772183 · 發表于 2023-6-20 09:03

是語法錯誤嗎？

帳號		自動登錄	找回密碼
密碼			立即注冊


1 黑幣	回復本帖可獲得 1 黑幣獎勵! 每人限 1 次

久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

編譯錯誤error: At end of source: #18: expected a ")"