- #include <stdlib.h>
- #include <stdio.h>
- #include <math.h>
- #include <stdio.h> /* Standard I/O .h-file */
- #include <ctype.h> /* Character functions */
- #include <string.h> /* String and memory functions */
- #include <stdbool.h>
- #include <stddef.h>
- #include <stdint.h>
- #include "stm32f10x.h"
- #include "stm32f10x_conf.h"
- #include "AES.h"
- #include "Serial.h"
- #include "Mcu_config.h"
- #define Nb 4
- int Nr=0;
- int Nk=0;
- int Nc = 128;
- unsigned char in[16], out[32], state[4][4];//in 明文 out密文,state中間值
- unsigned char RoundKey[RoundKeyLEN];
- unsigned char Key[32];
- #define AES_TEMP_BUFF_LEN 1024
- const uint8_t sbox[256] = {
- //0 1 2 3 4 5 6 7 8 9 A B C D E F
- 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
- 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
- 0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc, 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
- 0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a, 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
- 0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0, 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
- 0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b, 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
- 0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85, 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
- 0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5, 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
- 0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17, 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
- 0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88, 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
- 0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c, 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
- 0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9, 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
- 0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6, 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
- 0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e, 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
- 0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94, 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
- 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 };
- uint8_t getSBoxValue(uint8_t num)
- {
- return sbox[num];
- }
- // The round constant word array, Rcon[i], contains the values given by
- // x to th e power (i-1) being powers of x (x is denoted as {02}) in the field GF(2^8)
- // Note that i starts at 1, not 0).
- const uint8_t Rcon[255] = {
- 0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36, 0x6c, 0xd8, 0xab, 0x4d, 0x9a,
- 0x2f, 0x5e, 0xbc, 0x63, 0xc6, 0x97, 0x35, 0x6a, 0xd4, 0xb3, 0x7d, 0xfa, 0xef, 0xc5, 0x91, 0x39,
- 0x72, 0xe4, 0xd3, 0xbd, 0x61, 0xc2, 0x9f, 0x25, 0x4a, 0x94, 0x33, 0x66, 0xcc, 0x83, 0x1d, 0x3a,
- 0x74, 0xe8, 0xcb, 0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36, 0x6c, 0xd8,
- 0xab, 0x4d, 0x9a, 0x2f, 0x5e, 0xbc, 0x63, 0xc6, 0x97, 0x35, 0x6a, 0xd4, 0xb3, 0x7d, 0xfa, 0xef,
- 0xc5, 0x91, 0x39, 0x72, 0xe4, 0xd3, 0xbd, 0x61, 0xc2, 0x9f, 0x25, 0x4a, 0x94, 0x33, 0x66, 0xcc,
- 0x83, 0x1d, 0x3a, 0x74, 0xe8, 0xcb, 0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b,
- 0x36, 0x6c, 0xd8, 0xab, 0x4d, 0x9a, 0x2f, 0x5e, 0xbc, 0x63, 0xc6, 0x97, 0x35, 0x6a, 0xd4, 0xb3,
- 0x7d, 0xfa, 0xef, 0xc5, 0x91, 0x39, 0x72, 0xe4, 0xd3, 0xbd, 0x61, 0xc2, 0x9f, 0x25, 0x4a, 0x94,
- 0x33, 0x66, 0xcc, 0x83, 0x1d, 0x3a, 0x74, 0xe8, 0xcb, 0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20,
- 0x40, 0x80, 0x1b, 0x36, 0x6c, 0xd8, 0xab, 0x4d, 0x9a, 0x2f, 0x5e, 0xbc, 0x63, 0xc6, 0x97, 0x35,
- 0x6a, 0xd4, 0xb3, 0x7d, 0xfa, 0xef, 0xc5, 0x91, 0x39, 0x72, 0xe4, 0xd3, 0xbd, 0x61, 0xc2, 0x9f,
- 0x25, 0x4a, 0x94, 0x33, 0x66, 0xcc, 0x83, 0x1d, 0x3a, 0x74, 0xe8, 0xcb, 0x8d, 0x01, 0x02, 0x04,
- 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36, 0x6c, 0xd8, 0xab, 0x4d, 0x9a, 0x2f, 0x5e, 0xbc, 0x63,
- 0xc6, 0x97, 0x35, 0x6a, 0xd4, 0xb3, 0x7d, 0xfa, 0xef, 0xc5, 0x91, 0x39, 0x72, 0xe4, 0xd3, 0xbd,
- 0x61, 0xc2, 0x9f, 0x25, 0x4a, 0x94, 0x33, 0x66, 0xcc, 0x83, 0x1d, 0x3a, 0x74, 0xe8, 0xcb };
- // 密鑰生成
- void KeyExpansion()
- {
- int i,j;
- unsigned char temp[4],k;
-
- // The first round key is the key itself.
- for(i=0;i<Nk;i++)
- {
- RoundKey[i*4]=Key[i*4];
- RoundKey[i*4+1]=Key[i*4+1];
- RoundKey[i*4+2]=Key[i*4+2];
- RoundKey[i*4+3]=Key[i*4+3];
- }
- // All other round keys are found from the previous round keys.
- while (i < (Nb * (Nr+1)))
- {
- for(j=0;j<4;j++)
- {
- temp[j]=RoundKey[(i-1) * 4 + j];
- }
- if (i % Nk == 0)
- {
- // This function rotates the 4 bytes in a word to the left once.
- // [a0,a1,a2,a3] becomes [a1,a2,a3,a0]
- {
- k = temp[0];
- temp[0] = temp[1];
- temp[1] = temp[2];
- temp[2] = temp[3];
- temp[3] = k;
- }
- // SubWord() is a function that takes a four-byte input word and
- // applies the S-box to each of the four bytes to produce an output word.
- {
- temp[0]=getSBoxValue(temp[0]);
- temp[1]=getSBoxValue(temp[1]);
- temp[2]=getSBoxValue(temp[2]);
- temp[3]=getSBoxValue(temp[3]);
- }
- temp[0] = temp[0] ^ Rcon[i/Nk];
- }
- else if (Nk > 6 && i % Nk == 4)
- {
- {
- temp[0]=getSBoxValue(temp[0]);
- temp[1]=getSBoxValue(temp[1]);
- temp[2]=getSBoxValue(temp[2]);
- temp[3]=getSBoxValue(temp[3]);
- }
- }
- RoundKey[i*4+0] = RoundKey[(i-Nk)*4+0] ^ temp[0];
- RoundKey[i*4+1] = RoundKey[(i-Nk)*4+1] ^ temp[1];
- RoundKey[i*4+2] = RoundKey[(i-Nk)*4+2] ^ temp[2];
- RoundKey[i*4+3] = RoundKey[(i-Nk)*4+3] ^ temp[3];
- i++;
- }
- }
- //圈秘鑰加
- void AddRoundKey(int round)
- {
- int i,j;
- for(i=0;i<4;i++)
- {
- for(j=0;j<4;j++)
- {
- state[j][i] ^= RoundKey[round * Nb * 4 + i * Nb + j];
- }
- }
- }
- // s盒置換
- void SubBytes()
- {
- int i,j;
- for(i=0;i<4;i++)
- {
- for(j=0;j<4;j++)
- {
- state[i][j] = getSBoxValue(state[i][j]);
- }
- }
- }
- // 行移位
- void ShiftRows()
- {
- unsigned char temp;
- // Rotate first row 1 columns to left
- temp=state[1][0];
- state[1][0]=state[1][1];
- state[1][1]=state[1][2];
- state[1][2]=state[1][3];
- state[1][3]=temp;
- // Rotate second row 2 columns to left
- temp=state[2][0];
- state[2][0]=state[2][2];
- state[2][2]=temp;
- temp=state[2][1];
- state[2][1]=state[2][3];
- state[2][3]=temp;
- // Rotate third row 3 columns to left
- temp=state[3][0];
- state[3][0]=state[3][3];
- state[3][3]=state[3][2];
- state[3][2]=state[3][1];
- state[3][1]=temp;
- }
- // xtime is a macro that finds the product of {02} and the argument to xtime modulo {1b}
- #define xtime(x) ((x<<1) ^ (((x>>7) & 1) * 0x1b))
- // 列混合
- void MixColumns()
- {
- int i;
- unsigned char Tmp,Tm,t;
- for(i=0;i<4;i++)
- {
- t=state[0][i];
- Tmp = state[0][i] ^ state[1][i] ^ state[2][i] ^ state[3][i] ;
- Tm = state[0][i] ^ state[1][i] ; Tm = xtime(Tm); state[0][i] ^= Tm ^ Tmp ;
- Tm = state[1][i] ^ state[2][i] ; Tm = xtime(Tm); state[1][i] ^= Tm ^ Tmp ;
- Tm = state[2][i] ^ state[3][i] ; Tm = xtime(Tm); state[2][i] ^= Tm ^ Tmp ;
- Tm = state[3][i] ^ t ; Tm = xtime(Tm); state[3][i] ^= Tm ^ Tmp ;
- }
- }
- // Cipher is the main function that encrypts the PlainText.
- void Cipher()
- {
- int i,j,round=0;
- //Copy the input PlainText to state array.
- for(i=0;i<4;i++)
- {
- for(j=0;j<4;j++)
- {
- state[j][i] = in[i*4 + j];
- }
- }
- // Add the First round key to the state before starting the rounds.
- AddRoundKey(0);
-
- // There will be Nr rounds.
- // The first Nr-1 rounds are identical.
- // These Nr-1 rounds are executed in the loop below.
- for(round=1;round<Nr;round++)
- {
- SubBytes();
- ShiftRows();
- MixColumns();
- AddRoundKey(round);
- }
-
- // The last round is given below.
- // The MixColumns function is not here in the last round.
- SubBytes();
- ShiftRows();
- AddRoundKey(Nr);
- // The encryption process is over.
- // Copy the state array to output array.
- for(i=0;i<4;i++)
- {
- for(j=0;j<4;j++)
- {
- out[i*4+j]=state[j][i];
- }
- }
- }
- char *encrypt(char *str, char *key)
- {
- int i,j,Nl;
- int len;
- char *newstr;
- Nk = Nc / 32;
- Nr = Nk + 6;
-
- len= strlen(str);
- Nl = (int)ceil(len / 16);
-
- newstr = (char *)malloc(Nl*32);
- //memset(newstr,0,sizeof(newstr));
- memset(newstr,0,Nl*32);
-
- for(i=0;i<Nl;i++)
- {
- for(j=0;j<Nk*4;j++)
- {
- Key[j]=key[j];
- in[j]=str[i*16+j];
- }
-
- KeyExpansion();
- Cipher();
- memcpy(newstr+16*i, out, 16);
- //strcat(newstr,out);
- }
- return newstr;
- }
- void AES_Encrypt(char* ExpressText , char* CipherText , char* Aeskey)
- {
-
- CipherText = encrypt(ExpressText, Aeskey); //aesTempBuff[AES_TEMP_BUFF_LEN]
- UART_Printf ("encrypt result: ");
- UART_Printf (CipherText);
- UART_Printf ("\r\n");
- }
復(fù)制代碼 |