用STM32單片機開發2.8寸LCD模塊ILI9341資料代碼分享

ID:482553 · 發表于 2019-3-1 09:59

里面包含了LCD模塊底層代碼與原理圖等，方便大家進行開發

所有資料51hei提供下載:

15,2.8寸TFT LCD模塊資料(ILI9341).7z (7.94 MB, 下載次數: 194)

單片機源程序如下:

#include "lcd.h"
#include "stdlib.h"
#include "font.h"
#include "usart.h"
#include "delay.h"
//V1.2修改說明
//支持了SPFD5408的驅動,另外把液晶ID直接打印成HEX格式.方便查看LCD驅動IC.
//V1.3
//加入了快速IO的支持
//修改了背光控制的極性（適用于V1.8及以后的開發板版本）
//對于1.8版本之前(不包括1.8)的液晶模塊,請修改LCD_Init函數的LCD_LED=1;為LCD_LED=1;
//V1.4
//修改了LCD_ShowChar函數，使用畫點功能畫字符。
//加入了橫豎屏顯示的支持
//V1.5 20110730
//1,修改了B505液晶讀顏色有誤的bug.
//2,修改了快速IO及橫豎屏的設置方式.
//V1.6 20111116
//1,加入對LGDP4535液晶的驅動支持
//V1.7 20120713
//1,增加LCD_RD_DATA函數
//2,增加對ILI9341的支持
//3,增加ILI9325的獨立驅動代碼
//4,增加LCD_Scan_Dir函數(慎重使用)
//6,另外修改了部分原來的函數,以適應9341的操作
//V1.8 20120905
//1,加入LCD重要參數設置結構體lcddev
//2,加入LCD_Display_Dir函數,支持在線橫豎屏切換
//V1.9 20120911
//1,新增RM68042驅動（ID:6804），但是6804不支持橫屏顯示！！原因：改變掃描方式，
//導致6804坐標設置失效，試過很多方法都不行，暫時無解。
//V2.0 20120924
//在不硬件復位的情況下,ILI9341的ID讀取會被誤讀成9300,修改LCD_Init,將無法識別
//的情況（讀到ID為9300/非法ID）,強制指定驅動IC為ILI9341，執行9341的初始化。
//V2.1 20120930
//修正ILI9325讀顏色的bug。
//V2.2 20121007
//修正LCD_Scan_Dir的bug。
//V2.3 20130120
//新增6804支持橫屏顯示
//V2.4 20131120
//1,新增NT35310（ID:5310）驅動器的支持
//2,新增LCD_Set_Window函數,用于設置窗口,對快速填充,比較有用,但是該函數在橫屏時,不支持6804.
//V2.5 20140211
//1,新增NT35510（ID:5510）驅動器的支持
//V2.6 20140504
//1,新增ASCII 24*24字體的支持(更多字體用戶可以自行添加)
//2,修改部分函數參數,以支持MDK -O2優化
//3,針對9341/35310/35510,寫時間設置為最快,盡可能的提高速度
//4,去掉了SSD1289的支持,因為1289實在是太慢了,讀周期要1us...簡直奇葩.不適合F4使用
//5,修正68042及C505等IC的讀顏色函數的bug.
//V2.7 20140710
//1,修正LCD_Color_Fill函數的一個bug.
//2,修正LCD_Scan_Dir函數的一個bug.
//V2.8 20140721
//1,解決MDK使用-O2優化時LCD_ReadPoint函數讀點失效的問題.
//2,修正LCD_Scan_Dir橫屏時設置的掃描方式顯示不全的bug.
//V2.9 20141130
//1,新增對SSD1963 LCD的支持.
//2,新增LCD_SSD_BackLightSet函數
//3,取消ILI93XX的Rxx寄存器定義
//////////////////////////////////////////////////////////////////////////////////
//LCD的畫筆顏色和背景色
u16 POINT_COLOR=0x0000; //畫筆顏色
u16 BACK_COLOR=0xFFFF; //背景色
//管理LCD重要參數
//默認為豎屏
_lcd_dev lcddev;
//寫寄存器函數
//regval:寄存器值
void LCD_WR_REG(u16 regval)
{
LCD->LCD_REG=regval;//寫入要寫的寄存器序號
}
//寫LCD數據
//data:要寫入的值
void LCD_WR_DATA(u16 data)
{
LCD->LCD_RAM=data;
}
//讀LCD數據
//返回值:讀到的值
u16 LCD_RD_DATA(void)
{
vu16 ram; //防止被優化
ram=LCD->LCD_RAM;
return ram;
}
//寫寄存器
//LCD_Reg:寄存器地址
//LCD_RegValue:要寫入的數據
void LCD_WriteReg(u16 LCD_Reg,u16 LCD_RegValue)
{
LCD->LCD_REG = LCD_Reg; //寫入要寫的寄存器序號
LCD->LCD_RAM = LCD_RegValue;//寫入數據
}
//讀寄存器
//LCD_Reg:寄存器地址
//返回值:讀到的數據
u16 LCD_ReadReg(u16 LCD_Reg)
{
LCD_WR_REG(LCD_Reg); //寫入要讀的寄存器序號
delay_us(5);
return LCD_RD_DATA(); //返回讀到的值
}
//開始寫GRAM
void LCD_WriteRAM_Prepare(void)
{
LCD->LCD_REG=lcddev.wramcmd;
}
//LCD寫GRAM
//RGB_Code:顏色值
void LCD_WriteRAM(u16 RGB_Code)
{
LCD->LCD_RAM = RGB_Code;//寫十六位GRAM
}
//從ILI93xx讀出的數據為GBR格式，而我們寫入的時候為RGB格式。
//通過該函數轉換
//c:GBR格式的顏色值
//返回值：RGB格式的顏色值
u16 LCD_BGR2RGB(u16 c)
{
u16 r,g,b,rgb;
b=(c>>0)&0x1f;
g=(c>>5)&0x3f;
r=(c>>11)&0x1f;
rgb=(b<<11)+(g<<5)+(r<<0);
return(rgb);
}
//當mdk -O1時間優化時需要設置
//延時i
void opt_delay(u8 i)
{
while(i--);
}
//讀取個某點的顏色值
//x,y:坐標
//返回值:此點的顏色
u16 LCD_ReadPoint(u16 x,u16 y)
{
u16 r=0,g=0,b=0;
if(x>=lcddev.width||y>=lcddev.height)return 0; //超過了范圍,直接返回
LCD_SetCursor(x,y);
if(lcddev.id==0X9341||lcddev.id==0X6804||lcddev.id==0X5310||lcddev.id==0X1963)LCD_WR_REG(0X2E);//9341/6804/3510/1963 發送讀GRAM指令
else if(lcddev.id==0X5510)LCD_WR_REG(0X2E00); //5510 發送讀GRAM指令
else LCD_WR_REG(0X22); //其他IC發送讀GRAM指令
if(lcddev.id==0X9320)opt_delay(2); //FOR 9320,延時2us
r=LCD_RD_DATA(); //dummy Read
if(lcddev.id==0X1963)return r; //1963直接讀就可以
opt_delay(2);
r=LCD_RD_DATA(); //實際坐標顏色
if(lcddev.id==0X9341||lcddev.id==0X5310||lcddev.id==0X5510) //9341/NT35310/NT35510要分2次讀出
{
opt_delay(2);
b=LCD_RD_DATA();
g=r&0XFF; //對于9341/5310/5510,第一次讀取的是RG的值,R在前,G在后,各占8位
g<<=8;
}
if(lcddev.id==0X9325||lcddev.id==0X4535||lcddev.id==0X4531||lcddev.id==0XB505||lcddev.id==0XC505)return r; //這幾種IC直接返回顏色值
else if(lcddev.id==0X9341||lcddev.id==0X5310||lcddev.id==0X5510)return (((r>>11)<<11)|((g>>10)<<5)|(b>>11));//ILI9341/NT35310/NT35510需要公式轉換一下
else return LCD_BGR2RGB(r); //其他IC
}
//LCD開啟顯示
void LCD_DisplayOn(void)
{
if(lcddev.id==0X9341||lcddev.id==0X6804||lcddev.id==0X5310||lcddev.id==0X1963)LCD_WR_REG(0X29); //開啟顯示
else if(lcddev.id==0X5510)LCD_WR_REG(0X2900); //開啟顯示
else LCD_WriteReg(0X07,0x0173); //開啟顯示
}
//LCD關閉顯示
void LCD_DisplayOff(void)
{
if(lcddev.id==0X9341||lcddev.id==0X6804||lcddev.id==0X5310||lcddev.id==0X1963)LCD_WR_REG(0X28); //關閉顯示
else if(lcddev.id==0X5510)LCD_WR_REG(0X2800); //關閉顯示
else LCD_WriteReg(0X07,0x0);//關閉顯示
}
//設置光標位置
//Xpos:橫坐標
//Ypos:縱坐標
void LCD_SetCursor(u16 Xpos, u16 Ypos)
{
if(lcddev.id==0X9341||lcddev.id==0X5310)
{
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(Xpos>>8);LCD_WR_DATA(Xpos&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(Ypos>>8);LCD_WR_DATA(Ypos&0XFF);
}else if(lcddev.id==0X6804)
{
if(lcddev.dir==1)Xpos=lcddev.width-1-Xpos;//橫屏時處理
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(Xpos>>8);LCD_WR_DATA(Xpos&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(Ypos>>8);LCD_WR_DATA(Ypos&0XFF);
}else if(lcddev.id==0X1963)
{
if(lcddev.dir==0)//x坐標需要變換
{
Xpos=lcddev.width-1-Xpos;
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(0);LCD_WR_DATA(0);
LCD_WR_DATA(Xpos>>8);LCD_WR_DATA(Xpos&0XFF);
}else
{
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(Xpos>>8);LCD_WR_DATA(Xpos&0XFF);
LCD_WR_DATA((lcddev.width-1)>>8);LCD_WR_DATA((lcddev.width-1)&0XFF);
}
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(Ypos>>8);LCD_WR_DATA(Ypos&0XFF);
LCD_WR_DATA((lcddev.height-1)>>8);LCD_WR_DATA((lcddev.height-1)&0XFF);
}else if(lcddev.id==0X5510)
{
LCD_WR_REG(lcddev.setxcmd);LCD_WR_DATA(Xpos>>8);
LCD_WR_REG(lcddev.setxcmd+1);LCD_WR_DATA(Xpos&0XFF);
LCD_WR_REG(lcddev.setycmd);LCD_WR_DATA(Ypos>>8);
LCD_WR_REG(lcddev.setycmd+1);LCD_WR_DATA(Ypos&0XFF);
}else
{
if(lcddev.dir==1)Xpos=lcddev.width-1-Xpos;//橫屏其實就是調轉x,y坐標
LCD_WriteReg(lcddev.setxcmd, Xpos);
LCD_WriteReg(lcddev.setycmd, Ypos);
}
}
//設置LCD的自動掃描方向
//注意:其他函數可能會受到此函數設置的影響(尤其是9341/6804這兩個奇葩),
//所以,一般設置為L2R_U2D即可,如果設置為其他掃描方式,可能導致顯示不正常.
//dir:0~7,代表8個方向(具體定義見lcd.h)
//9320/9325/9328/4531/4535/1505/b505/5408/9341/5310/5510/1963等IC已經實際測試
void LCD_Scan_Dir(u8 dir)
{
u16 regval=0;
u16 dirreg=0;
u16 temp;
if((lcddev.dir==1&&lcddev.id!=0X6804&&lcddev.id!=0X1963)||(lcddev.dir==0&&lcddev.id==0X1963))//橫屏時，對6804和1963不改變掃描方向！豎屏時1963改變方向
{
switch(dir)//方向轉換
{
case 0:dir=6;break;
case 1:dir=7;break;
case 2:dir=4;break;
case 3:dir=5;break;
case 4:dir=1;break;
case 5:dir=0;break;
case 6:dir=3;break;
case 7:dir=2;break;
}
}
if(lcddev.id==0x9341||lcddev.id==0X6804||lcddev.id==0X5310||lcddev.id==0X5510||lcddev.id==0X1963)//9341/6804/5310/5510/1963,特殊處理
{
switch(dir)
{
case L2R_U2D://從左到右,從上到下
regval|=(0<<7)|(0<<6)|(0<<5);
break;
case L2R_D2U://從左到右,從下到上
regval|=(1<<7)|(0<<6)|(0<<5);
break;
case R2L_U2D://從右到左,從上到下
regval|=(0<<7)|(1<<6)|(0<<5);
break;
case R2L_D2U://從右到左,從下到上
regval|=(1<<7)|(1<<6)|(0<<5);
break;
case U2D_L2R://從上到下,從左到右
regval|=(0<<7)|(0<<6)|(1<<5);
break;
case U2D_R2L://從上到下,從右到左
regval|=(0<<7)|(1<<6)|(1<<5);
break;
case D2U_L2R://從下到上,從左到右
regval|=(1<<7)|(0<<6)|(1<<5);
break;
case D2U_R2L://從下到上,從右到左
regval|=(1<<7)|(1<<6)|(1<<5);
break;
}
if(lcddev.id==0X5510)dirreg=0X3600;
else dirreg=0X36;
if((lcddev.id!=0X5310)&&(lcddev.id!=0X5510)&&(lcddev.id!=0X1963))regval|=0X08;//5310/5510/1963不需要BGR
if(lcddev.id==0X6804)regval|=0x02;//6804的BIT6和9341的反了
LCD_WriteReg(dirreg,regval);
if(lcddev.id!=0X1963)//1963不做坐標處理
{
if(regval&0X20)
{
if(lcddev.width<lcddev.height)//交換X,Y
{
temp=lcddev.width;
lcddev.width=lcddev.height;
lcddev.height=temp;
}
}else
{
if(lcddev.width>lcddev.height)//交換X,Y
{
temp=lcddev.width;
lcddev.width=lcddev.height;
lcddev.height=temp;
}
}
}
if(lcddev.id==0X5510)
{
LCD_WR_REG(lcddev.setxcmd);LCD_WR_DATA(0);
LCD_WR_REG(lcddev.setxcmd+1);LCD_WR_DATA(0);
LCD_WR_REG(lcddev.setxcmd+2);LCD_WR_DATA((lcddev.width-1)>>8);
LCD_WR_REG(lcddev.setxcmd+3);LCD_WR_DATA((lcddev.width-1)&0XFF);
LCD_WR_REG(lcddev.setycmd);LCD_WR_DATA(0);
LCD_WR_REG(lcddev.setycmd+1);LCD_WR_DATA(0);
LCD_WR_REG(lcddev.setycmd+2);LCD_WR_DATA((lcddev.height-1)>>8);
LCD_WR_REG(lcddev.setycmd+3);LCD_WR_DATA((lcddev.height-1)&0XFF);
}else
{
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(0);LCD_WR_DATA(0);
LCD_WR_DATA((lcddev.width-1)>>8);LCD_WR_DATA((lcddev.width-1)&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(0);LCD_WR_DATA(0);
LCD_WR_DATA((lcddev.height-1)>>8);LCD_WR_DATA((lcddev.height-1)&0XFF);
}
}else
{
switch(dir)
{
case L2R_U2D://從左到右,從上到下
regval|=(1<<5)|(1<<4)|(0<<3);
break;
case L2R_D2U://從左到右,從下到上
regval|=(0<<5)|(1<<4)|(0<<3);
break;
case R2L_U2D://從右到左,從上到下
regval|=(1<<5)|(0<<4)|(0<<3);
break;
case R2L_D2U://從右到左,從下到上
regval|=(0<<5)|(0<<4)|(0<<3);
break;
case U2D_L2R://從上到下,從左到右
regval|=(1<<5)|(1<<4)|(1<<3);
break;
case U2D_R2L://從上到下,從右到左
regval|=(1<<5)|(0<<4)|(1<<3);
break;
case D2U_L2R://從下到上,從左到右
regval|=(0<<5)|(1<<4)|(1<<3);
break;
case D2U_R2L://從下到上,從右到左
regval|=(0<<5)|(0<<4)|(1<<3);
break;
}
dirreg=0X03;
regval|=1<<12;
LCD_WriteReg(dirreg,regval);
}
}
//畫點
//x,y:坐標
//POINT_COLOR:此點的顏色
void LCD_DrawPoint(u16 x,u16 y)
{
LCD_SetCursor(x,y); //設置光標位置
LCD_WriteRAM_Prepare(); //開始寫入GRAM
LCD->LCD_RAM=POINT_COLOR;
}
//快速畫點
//x,y:坐標
//color:顏色
void LCD_Fast_DrawPoint(u16 x,u16 y,u16 color)
{
if(lcddev.id==0X9341||lcddev.id==0X5310)
{
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(x>>8);LCD_WR_DATA(x&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(y>>8);LCD_WR_DATA(y&0XFF);
}else if(lcddev.id==0X5510)
{
LCD_WR_REG(lcddev.setxcmd);LCD_WR_DATA(x>>8);
LCD_WR_REG(lcddev.setxcmd+1);LCD_WR_DATA(x&0XFF);
LCD_WR_REG(lcddev.setycmd);LCD_WR_DATA(y>>8);
LCD_WR_REG(lcddev.setycmd+1);LCD_WR_DATA(y&0XFF);
}else if(lcddev.id==0X1963)
{
if(lcddev.dir==0)x=lcddev.width-1-x;
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(x>>8);LCD_WR_DATA(x&0XFF);
LCD_WR_DATA(x>>8);LCD_WR_DATA(x&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(y>>8);LCD_WR_DATA(y&0XFF);
LCD_WR_DATA(y>>8);LCD_WR_DATA(y&0XFF);
}else if(lcddev.id==0X6804)
{
if(lcddev.dir==1)x=lcddev.width-1-x;//橫屏時處理
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(x>>8);LCD_WR_DATA(x&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(y>>8);LCD_WR_DATA(y&0XFF);
}else
{
if(lcddev.dir==1)x=lcddev.width-1-x;//橫屏其實就是調轉x,y坐標
LCD_WriteReg(lcddev.setxcmd,x);
LCD_WriteReg(lcddev.setycmd,y);
}
LCD->LCD_REG=lcddev.wramcmd;
LCD->LCD_RAM=color;
}
//SSD1963 背光設置
//pwm:背光等級,0~100.越大越亮.
void LCD_SSD_BackLightSet(u8 pwm)
{
LCD_WR_REG(0xBE); //配置PWM輸出
LCD_WR_DATA(0x05); //1設置PWM頻率
LCD_WR_DATA(pwm*2.55);//2設置PWM占空比
LCD_WR_DATA(0x01); //3設置C
LCD_WR_DATA(0xFF); //4設置D
LCD_WR_DATA(0x00); //5設置E
LCD_WR_DATA(0x00); //6設置F
}
//設置LCD顯示方向
//dir:0,豎屏；1,橫屏
void LCD_Display_Dir(u8 dir)
{
if(dir==0) //豎屏
{
lcddev.dir=0; //豎屏
lcddev.width=240;
lcddev.height=320;
if(lcddev.id==0X9341||lcddev.id==0X6804||lcddev.id==0X5310)
{
lcddev.wramcmd=0X2C;
lcddev.setxcmd=0X2A;
lcddev.setycmd=0X2B;
if(lcddev.id==0X6804||lcddev.id==0X5310)
{
lcddev.width=320;
lcddev.height=480;
}
}else if(lcddev.id==0x5510)
{
lcddev.wramcmd=0X2C00;
lcddev.setxcmd=0X2A00;
lcddev.setycmd=0X2B00;
lcddev.width=480;
lcddev.height=800;
}else if(lcddev.id==0X1963)
{
lcddev.wramcmd=0X2C; //設置寫入GRAM的指令
lcddev.setxcmd=0X2B; //設置寫X坐標指令
lcddev.setycmd=0X2A; //設置寫Y坐標指令
lcddev.width=480; //設置寬度480
lcddev.height=800; //設置高度800
}else
{
lcddev.wramcmd=0X22;
lcddev.setxcmd=0X20;
lcddev.setycmd=0X21;
}
}else //橫屏
{
lcddev.dir=1; //橫屏
lcddev.width=320;
lcddev.height=240;
if(lcddev.id==0X9341||lcddev.id==0X5310)
{
lcddev.wramcmd=0X2C;
lcddev.setxcmd=0X2A;
lcddev.setycmd=0X2B;
}else if(lcddev.id==0X6804)
{
lcddev.wramcmd=0X2C;
lcddev.setxcmd=0X2B;
lcddev.setycmd=0X2A;
}else if(lcddev.id==0x5510)
{
lcddev.wramcmd=0X2C00;
lcddev.setxcmd=0X2A00;
lcddev.setycmd=0X2B00;
lcddev.width=800;
lcddev.height=480;
}else if(lcddev.id==0X1963)
{
lcddev.wramcmd=0X2C; //設置寫入GRAM的指令
lcddev.setxcmd=0X2A; //設置寫X坐標指令
lcddev.setycmd=0X2B; //設置寫Y坐標指令
lcddev.width=800; //設置寬度800
lcddev.height=480; //設置高度480
}else
{
lcddev.wramcmd=0X22;
lcddev.setxcmd=0X21;
lcddev.setycmd=0X20;
}
if(lcddev.id==0X6804||lcddev.id==0X5310)
{
lcddev.width=480;
lcddev.height=320;
}
}
LCD_Scan_Dir(DFT_SCAN_DIR); //默認掃描方向
}
//設置窗口,并自動設置畫點坐標到窗口左上角(sx,sy).
//sx,sy:窗口起始坐標(左上角)
//width,height:窗口寬度和高度,必須大于0!!
//窗體大小:width*height.
void LCD_Set_Window(u16 sx,u16 sy,u16 width,u16 height)
{
u8 hsareg,heareg,vsareg,veareg;
u16 hsaval,heaval,vsaval,veaval;
u16 twidth,theight;
twidth=sx+width-1;
theight=sy+height-1;
if(lcddev.id==0X9341||lcddev.id==0X5310||lcddev.id==0X6804||(lcddev.dir==1&&lcddev.id==0X1963))
{
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(sx>>8);
LCD_WR_DATA(sx&0XFF);
LCD_WR_DATA(twidth>>8);
LCD_WR_DATA(twidth&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(sy>>8);
LCD_WR_DATA(sy&0XFF);
LCD_WR_DATA(theight>>8);
LCD_WR_DATA(theight&0XFF);
}else if(lcddev.id==0X1963)//1963豎屏特殊處理
{
sx=lcddev.width-width-sx;
height=sy+height-1;
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(sx>>8);
LCD_WR_DATA(sx&0XFF);
LCD_WR_DATA((sx+width-1)>>8);
LCD_WR_DATA((sx+width-1)&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(sy>>8);
LCD_WR_DATA(sy&0XFF);
LCD_WR_DATA(height>>8);
LCD_WR_DATA(height&0XFF);
}else if(lcddev.id==0X5510)
{
LCD_WR_REG(lcddev.setxcmd);LCD_WR_DATA(sx>>8);
LCD_WR_REG(lcddev.setxcmd+1);LCD_WR_DATA(sx&0XFF);
LCD_WR_REG(lcddev.setxcmd+2);LCD_WR_DATA(twidth>>8);
LCD_WR_REG(lcddev.setxcmd+3);LCD_WR_DATA(twidth&0XFF);
LCD_WR_REG(lcddev.setycmd);LCD_WR_DATA(sy>>8);
LCD_WR_REG(lcddev.setycmd+1);LCD_WR_DATA(sy&0XFF);
LCD_WR_REG(lcddev.setycmd+2);LCD_WR_DATA(theight>>8);
LCD_WR_REG(lcddev.setycmd+3);LCD_WR_DATA(theight&0XFF);
}else //其他驅動IC
{
if(lcddev.dir==1)//橫屏
{
//窗口值
hsaval=sy;
heaval=theight;
vsaval=lcddev.width-twidth-1;
veaval=lcddev.width-sx-1;
}else
{
hsaval=sx;
heaval=twidth;
vsaval=sy;
veaval=theight;
}
hsareg=0X50;heareg=0X51;//水平方向窗口寄存器
vsareg=0X52;veareg=0X53;//垂直方向窗口寄存器
//設置寄存器值
LCD_WriteReg(hsareg,hsaval);
LCD_WriteReg(heareg,heaval);
LCD_WriteReg(vsareg,vsaval);
LCD_WriteReg(veareg,veaval);
LCD_SetCursor(sx,sy); //設置光標位置
}
}
//初始化lcd
//該初始化函數可以初始化各種ILI93XX液晶,但是其他函數是基于ILI9320的!!!
//在其他型號的驅動芯片上沒有測試!
void LCD_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure;
FSMC_NORSRAMTimingInitTypeDef readWriteTiming;
FSMC_NORSRAMTimingInitTypeDef writeTiming;
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC,ENABLE); //使能FSMC時鐘
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB|RCC_APB2Periph_GPIOD|RCC_APB2Periph_GPIOE|RCC_APB2Periph_GPIOG,ENABLE);//使能PORTB,D,E,G以及AFIO復用功能時鐘
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; //PB0 推挽輸出背光
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; //推挽輸出
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
//PORTD復用推挽輸出
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_10|GPIO_Pin_14|GPIO_Pin_15; // //PORTD復用推挽輸出
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; //復用推挽輸出
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOD, &GPIO_InitStructure);
//PORTE復用推挽輸出
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9|GPIO_Pin_10|GPIO_Pin_11|GPIO_Pin_12|GPIO_Pin_13|GPIO_Pin_14|GPIO_Pin_15; // //PORTD復用推挽輸出
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; //復用推挽輸出
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOE, &GPIO_InitStructure);
// //PORTG12復用推挽輸出 A0
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_12; // //PORTD復用推挽輸出
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; //復用推挽輸出
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOG, &GPIO_InitStructure);
readWriteTiming.FSMC_AddressSetupTime = 0x01; //地址建立時間（ADDSET）為2個HCLK 1/36M=27ns
readWriteTiming.FSMC_AddressHoldTime = 0x00; //地址保持時間（ADDHLD）模式A未用到
readWriteTiming.FSMC_DataSetupTime = 0x0f; // 數據保存時間為16個HCLK,因為液晶驅動IC的讀數據的時候，速度不能太快，尤其對1289這個IC。
readWriteTiming.FSMC_BusTurnAroundDuration = 0x00;
readWriteTiming.FSMC_CLKDivision = 0x00;
readWriteTiming.FSMC_DataLatency = 0x00;
readWriteTiming.FSMC_AccessMode = FSMC_AccessMode_A; //模式A
writeTiming.FSMC_AddressSetupTime = 0x00; //地址建立時間（ADDSET）為1個HCLK
writeTiming.FSMC_AddressHoldTime = 0x00; //地址保持時間（A
writeTiming.FSMC_DataSetupTime = 0x03; ////數據保存時間為4個HCLK
writeTiming.FSMC_BusTurnAroundDuration = 0x00;
writeTiming.FSMC_CLKDivision = 0x00;
writeTiming.FSMC_DataLatency = 0x00;
writeTiming.FSMC_AccessMode = FSMC_AccessMode_A; //模式A
FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM4;// 這里我們使用NE4 ，也就對應BTCR[6],[7]。
FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; // 不復用數據地址
FSMC_NORSRAMInitStructure.FSMC_MemoryType =FSMC_MemoryType_SRAM;// FSMC_MemoryType_SRAM; //SRAM
FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;//存儲器數據寬度為16bit
FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode =FSMC_BurstAccessMode_Disable;// FSMC_BurstAccessMode_Disable;
FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait=FSMC_AsynchronousWait_Disable;
FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; // 存儲器寫使能
FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Enable; // 讀寫使用不同的時序
FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &readWriteTiming; //讀寫時序
FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &writeTiming; //寫時序
FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); //初始化FSMC配置
FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE); // 使能BANK1
delay_ms(50); // delay 50 ms
lcddev.id=LCD_ReadReg(0x0000); //讀ID（9320/9325/9328/4531/4535等IC）
if(lcddev.id<0XFF||lcddev.id==0XFFFF||lcddev.id==0X9300)//讀到ID不正確,新增lcddev.id==0X9300判斷，因為9341在未被復位的情況下會被讀成9300
{
//嘗試9341 ID的讀取
LCD_WR_REG(0XD3);
lcddev.id=LCD_RD_DATA(); //dummy read
lcddev.id=LCD_RD_DATA(); //讀到0X00
lcddev.id=LCD_RD_DATA(); //讀取93
lcddev.id<<=8;
lcddev.id|=LCD_RD_DATA(); //讀取41
if(lcddev.id!=0X9341) //非9341,嘗試是不是6804
{
LCD_WR_REG(0XBF);
lcddev.id=LCD_RD_DATA(); //dummy read
lcddev.id=LCD_RD_DATA(); //讀回0X01
lcddev.id=LCD_RD_DATA(); //讀回0XD0
lcddev.id=LCD_RD_DATA(); //這里讀回0X68
lcddev.id<<=8;
lcddev.id|=LCD_RD_DATA(); //這里讀回0X04
if(lcddev.id!=0X6804) //也不是6804,嘗試看看是不是NT35310
{
LCD_WR_REG(0XD4);
lcddev.id=LCD_RD_DATA();//dummy read
lcddev.id=LCD_RD_DATA();//讀回0X01
lcddev.id=LCD_RD_DATA();//讀回0X53
lcddev.id<<=8;
lcddev.id|=LCD_RD_DATA(); //這里讀回0X10
if(lcddev.id!=0X5310) //也不是NT35310,嘗試看看是不是NT35510
{
LCD_WR_REG(0XDA00);
lcddev.id=LCD_RD_DATA(); //讀回0X00
LCD_WR_REG(0XDB00);
lcddev.id=LCD_RD_DATA(); //讀回0X80
lcddev.id<<=8;
LCD_WR_REG(0XDC00);
lcddev.id|=LCD_RD_DATA(); //讀回0X00
if(lcddev.id==0x8000)lcddev.id=0x5510;//NT35510讀回的ID是8000H,為方便區分,我們強制設置為5510
if(lcddev.id!=0X5510) //也不是NT5510,嘗試看看是不是SSD1963
{
LCD_WR_REG(0XA1);
lcddev.id=LCD_RD_DATA();
lcddev.id=LCD_RD_DATA(); //讀回0X57
lcddev.id<<=8;
lcddev.id|=LCD_RD_DATA(); //讀回0X61
if(lcddev.id==0X5761)lcddev.id=0X1963;//SSD1963讀回的ID是5761H,為方便區分,我們強制設置為1963
}
}
}
}
}
printf(" LCD ID:%x\r\n",lcddev.id); //打印LCD ID
if(lcddev.id==0X9341) //9341初始化
{
LCD_WR_REG(0xCF);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC1);
LCD_WR_DATA(0X30);
LCD_WR_REG(0xED);
LCD_WR_DATA(0x64);
LCD_WR_DATA(0x03);
LCD_WR_DATA(0X12);
LCD_WR_DATA(0X81);
LCD_WR_REG(0xE8);
LCD_WR_DATA(0x85);
LCD_WR_DATA(0x10);
LCD_WR_DATA(0x7A);
LCD_WR_REG(0xCB);
LCD_WR_DATA(0x39);
LCD_WR_DATA(0x2C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x34);
LCD_WR_DATA(0x02);
LCD_WR_REG(0xF7);
LCD_WR_DATA(0x20);
LCD_WR_REG(0xEA);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC0); //Power control
LCD_WR_DATA(0x1B); //VRH[5:0]
LCD_WR_REG(0xC1); //Power control
LCD_WR_DATA(0x01); //SAP[2:0];BT[3:0]
LCD_WR_REG(0xC5); //VCM control
LCD_WR_DATA(0x30); //3F
LCD_WR_DATA(0x30); //3C
LCD_WR_REG(0xC7); //VCM control2
LCD_WR_DATA(0XB7);
LCD_WR_REG(0x36); // Memory Access Control
LCD_WR_DATA(0x48);
LCD_WR_REG(0x3A);
LCD_WR_DATA(0x55);
LCD_WR_REG(0xB1);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x1A);
LCD_WR_REG(0xB6); // Display Function Control
LCD_WR_DATA(0x0A);
LCD_WR_DATA(0xA2);
LCD_WR_REG(0xF2); // 3Gamma Function Disable
LCD_WR_DATA(0x00);
LCD_WR_REG(0x26); //Gamma curve selected
LCD_WR_DATA(0x01);
LCD_WR_REG(0xE0); //Set Gamma
LCD_WR_DATA(0x0F);
LCD_WR_DATA(0x2A);
LCD_WR_DATA(0x28);
LCD_WR_DATA(0x08);
LCD_WR_DATA(0x0E);
LCD_WR_DATA(0x08);
LCD_WR_DATA(0x54);
LCD_WR_DATA(0XA9);
LCD_WR_DATA(0x43);
LCD_WR_DATA(0x0A);
LCD_WR_DATA(0x0F);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0XE1); //Set Gamma
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x15);
LCD_WR_DATA(0x17);
LCD_WR_DATA(0x07);
LCD_WR_DATA(0x11);
LCD_WR_DATA(0x06);
LCD_WR_DATA(0x2B);
LCD_WR_DATA(0x56);
LCD_WR_DATA(0x3C);
LCD_WR_DATA(0x05);
LCD_WR_DATA(0x10);
LCD_WR_DATA(0x0F);
LCD_WR_DATA(0x3F);
LCD_WR_DATA(0x3F);
LCD_WR_DATA(0x0F);
LCD_WR_REG(0x2B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x01);
LCD_WR_DATA(0x3f);
LCD_WR_REG(0x2A);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xef);
LCD_WR_REG(0x11); //Exit Sleep
delay_ms(120);
LCD_WR_REG(0x29); //display on
}else if(lcddev.id==0x6804) //6804初始化
{
LCD_WR_REG(0X11);
delay_ms(20);
LCD_WR_REG(0XD0);//VCI1 VCL VGH VGL DDVDH VREG1OUT power amplitude setting
LCD_WR_DATA(0X07);
LCD_WR_DATA(0X42);
LCD_WR_DATA(0X1D);
LCD_WR_REG(0XD1);//VCOMH VCOM_AC amplitude setting
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X1a);
LCD_WR_DATA(0X09);
LCD_WR_REG(0XD2);//Operational Amplifier Circuit Constant Current Adjust , charge pump frequency setting
LCD_WR_DATA(0X01);
LCD_WR_DATA(0X22);
LCD_WR_REG(0XC0);//REV SM GS
LCD_WR_DATA(0X10);
LCD_WR_DATA(0X3B);
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X02);
LCD_WR_DATA(0X11);
LCD_WR_REG(0XC5);// Frame rate setting = 72HZ when setting 0x03
LCD_WR_DATA(0X03);
LCD_WR_REG(0XC8);//Gamma setting
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X25);
LCD_WR_DATA(0X21);
LCD_WR_DATA(0X05);
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X0a);
LCD_WR_DATA(0X65);
LCD_WR_DATA(0X25);
LCD_WR_DATA(0X77);
LCD_WR_DATA(0X50);
LCD_WR_DATA(0X0f);
LCD_WR_DATA(0X00);
LCD_WR_REG(0XF8);
LCD_WR_DATA(0X01);
LCD_WR_REG(0XFE);
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X02);
LCD_WR_REG(0X20);//Exit invert mode
LCD_WR_REG(0X36);
LCD_WR_DATA(0X08);//原來是a
LCD_WR_REG(0X3A);
LCD_WR_DATA(0X55);//16位模式
LCD_WR_REG(0X2B);
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X01);
LCD_WR_DATA(0X3F);
LCD_WR_REG(0X2A);
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X00);
LCD_WR_DATA(0X01);
LCD_WR_DATA(0XDF);
delay_ms(120);
LCD_WR_REG(0X29);
}else if(lcddev.id==0x5310)
{
LCD_WR_REG(0xED);
LCD_WR_DATA(0x01);
LCD_WR_DATA(0xFE);
LCD_WR_REG(0xEE);
LCD_WR_DATA(0xDE);
LCD_WR_DATA(0x21);
LCD_WR_REG(0xF1);
LCD_WR_DATA(0x01);
LCD_WR_REG(0xDF);
LCD_WR_DATA(0x10);
//VCOMvoltage//
LCD_WR_REG(0xC4);
LCD_WR_DATA(0x8F); //5f
LCD_WR_REG(0xC6);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xE2);
LCD_WR_DATA(0xE2);
LCD_WR_DATA(0xE2);
LCD_WR_REG(0xBF);
LCD_WR_DATA(0xAA);
LCD_WR_REG(0xB0);
LCD_WR_DATA(0x0D);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x0D);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x11);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x19);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x21);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x2D);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x3D);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x5D);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x5D);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB1);
LCD_WR_DATA(0x80);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x8B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x96);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB2);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x02);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x03);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB3);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB4);
LCD_WR_DATA(0x8B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x96);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA1);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB5);
LCD_WR_DATA(0x02);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x03);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x04);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB6);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB7);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x3F);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x5E);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x64);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x8C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xAC);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xDC);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x70);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x90);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xEB);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xDC);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB8);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xBA);
LCD_WR_DATA(0x24);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC1);
LCD_WR_DATA(0x20);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x54);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xFF);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC2);
LCD_WR_DATA(0x0A);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x04);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC3);
LCD_WR_DATA(0x3C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x3A);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x39);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x37);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x3C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x36);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x32);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x2F);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x2C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x29);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x26);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x24);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x24);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x23);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x3C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x36);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x32);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x2F);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x2C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x29);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x26);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x24);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x24);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x23);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC4);
LCD_WR_DATA(0x62);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x05);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x84);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xF0);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x18);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA4);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x18);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x50);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x0C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x17);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x95);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xF3);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xE6);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC5);
LCD_WR_DATA(0x32);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x44);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x65);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x76);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x88);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC6);
LCD_WR_DATA(0x20);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x17);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x01);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC7);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC8);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xC9);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE0);
LCD_WR_DATA(0x16);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x1C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x21);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x36);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x46);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x52);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x64);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x7A);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x8B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x99);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA8);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xB9);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC4);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xCA);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD2);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD9);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xE0);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xF3);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE1);
LCD_WR_DATA(0x16);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x1C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x22);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x36);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x45);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x52);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x64);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x7A);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x8B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x99);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA8);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xB9);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC4);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xCA);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD2);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD8);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xE0);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xF3);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE2);
LCD_WR_DATA(0x05);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x0B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x1B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x34);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x44);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x4F);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x61);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x79);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x88);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x97);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA6);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xB7);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC2);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC7);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD1);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD6);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xDD);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xF3);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE3);
LCD_WR_DATA(0x05);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x1C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x33);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x44);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x50);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x62);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x78);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x88);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x97);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA6);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xB7);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC2);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC7);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD1);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD5);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xDD);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xF3);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE4);
LCD_WR_DATA(0x01);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x01);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x02);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x2A);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x3C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x4B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x5D);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x74);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x84);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x93);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA2);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xB3);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xBE);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC4);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xCD);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD3);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xDD);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xF3);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE5);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x02);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x29);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x3C);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x4B);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x5D);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x74);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x84);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x93);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xA2);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xB3);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xBE);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xC4);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xCD);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xD3);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xDC);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xF3);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE6);
LCD_WR_DATA(0x11);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x34);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x56);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x76);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x77);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x66);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x88);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x99);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xBB);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x99);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x66);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x55);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x55);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x45);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x43);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x44);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE7);
LCD_WR_DATA(0x32);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x55);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x76);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x66);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x67);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x67);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x87);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x99);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xBB);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x99);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x77);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x44);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x56);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x23);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x33);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x45);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE8);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x99);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x87);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x88);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x77);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x66);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x88);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xAA);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0xBB);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x99);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x66);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x55);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x55);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x44);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x44);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x55);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xE9);
LCD_WR_DATA(0xAA);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0x00);
LCD_WR_DATA(0xAA);
LCD_WR_REG(0xCF);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xF0);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x50);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xF3);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xF9);
LCD_WR_DATA(0x06);
LCD_WR_DATA(0x10);
LCD_WR_DATA(0x29);
LCD_WR_DATA(0x00);
LCD_WR_REG(0x3A);
LCD_WR_DATA(0x55); //66
LCD_WR_REG(0x11);
delay_ms(100);
LCD_WR_REG(0x29);
LCD_WR_REG(0x35);
LCD_WR_DATA(0x00);
LCD_WR_REG(0x51);
LCD_WR_DATA(0xFF);
LCD_WR_REG(0x53);
LCD_WR_DATA(0x2C);
LCD_WR_REG(0x55);
LCD_WR_DATA(0x82);
LCD_WR_REG(0x2c);
}else if(lcddev.id==0x5510)
{
LCD_WriteReg(0xF000,0x55);
LCD_WriteReg(0xF001,0xAA);
LCD_WriteReg(0xF002,0x52);
LCD_WriteReg(0xF003,0x08);
LCD_WriteReg(0xF004,0x01);
//AVDD Set AVDD 5.2V
LCD_WriteReg(0xB000,0x0D);
LCD_WriteReg(0xB001,0x0D);
LCD_WriteReg(0xB002,0x0D);
//AVDD ratio
LCD_WriteReg(0xB600,0x34);
LCD_WriteReg(0xB601,0x34);
LCD_WriteReg(0xB602,0x34);
//AVEE -5.2V
LCD_WriteReg(0xB100,0x0D);
LCD_WriteReg(0xB101,0x0D);
LCD_WriteReg(0xB102,0x0D);
//AVEE ratio
LCD_WriteReg(0xB700,0x34);
LCD_WriteReg(0xB701,0x34);
LCD_WriteReg(0xB702,0x34);
//VCL -2.5V
LCD_WriteReg(0xB200,0x00);
LCD_WriteReg(0xB201,0x00);
LCD_WriteReg(0xB202,0x00);
//VCL ratio
LCD_WriteReg(0xB800,0x24);
LCD_WriteReg(0xB801,0x24);
LCD_WriteReg(0xB802,0x24);
//VGH 15V (Free pump)
LCD_WriteReg(0xBF00,0x01);
LCD_WriteReg(0xB300,0x0F);
LCD_WriteReg(0xB301,0x0F);
LCD_WriteReg(0xB302,0x0F);
//VGH ratio
LCD_WriteReg(0xB900,0x34);
LCD_WriteReg(0xB901,0x34);
LCD_WriteReg(0xB902,0x34);
//VGL_REG -10V
LCD_WriteReg(0xB500,0x08);
LCD_WriteReg(0xB501,0x08);
LCD_WriteReg(0xB502,0x08);
LCD_WriteReg(0xC200,0x03);
//VGLX ratio
LCD_WriteReg(0xBA00,0x24);
LCD_WriteReg(0xBA01,0x24);
LCD_WriteReg(0xBA02,0x24);
//VGMP/VGSP 4.5V/0V
LCD_WriteReg(0xBC00,0x00);
LCD_WriteReg(0xBC01,0x78);
LCD_WriteReg(0xBC02,0x00);
//VGMN/VGSN -4.5V/0V
LCD_WriteReg(0xBD00,0x00);
LCD_WriteReg(0xBD01,0x78);
LCD_WriteReg(0xBD02,0x00);
//VCOM
LCD_WriteReg(0xBE00,0x00);
LCD_WriteReg(0xBE01,0x64);
//Gamma Setting
LCD_WriteReg(0xD100,0x00);
LCD_WriteReg(0xD101,0x33);
LCD_WriteReg(0xD102,0x00);
LCD_WriteReg(0xD103,0x34);
LCD_WriteReg(0xD104,0x00);
LCD_WriteReg(0xD105,0x3A);
LCD_WriteReg(0xD106,0x00);
LCD_WriteReg(0xD107,0x4A);
LCD_WriteReg(0xD108,0x00);
LCD_WriteReg(0xD109,0x5C);
LCD_WriteReg(0xD10A,0x00);
LCD_WriteReg(0xD10B,0x81);
LCD_WriteReg(0xD10C,0x00);
LCD_WriteReg(0xD10D,0xA6);
LCD_WriteReg(0xD10E,0x00);
LCD_WriteReg(0xD10F,0xE5);
LCD_WriteReg(0xD110,0x01);
LCD_WriteReg(0xD111,0x13);
LCD_WriteReg(0xD112,0x01);
LCD_WriteReg(0xD113,0x54);
LCD_WriteReg(0xD114,0x01);
LCD_WriteReg(0xD115,0x82);
LCD_WriteReg(0xD116,0x01);
LCD_WriteReg(0xD117,0xCA);
LCD_WriteReg(0xD118,0x02);
LCD_WriteReg(0xD119,0x00);
LCD_WriteReg(0xD11A,0x02);
LCD_WriteReg(0xD11B,0x01);
LCD_WriteReg(0xD11C,0x02);
LCD_WriteReg(0xD11D,0x34);
LCD_WriteReg(0xD11E,0x02);
LCD_WriteReg(0xD11F,0x67);
LCD_WriteReg(0xD120,0x02);
LCD_WriteReg(0xD121,0x84);
LCD_WriteReg(0xD122,0x02);
LCD_WriteReg(0xD123,0xA4);
LCD_WriteReg(0xD124,0x02);
LCD_WriteReg(0xD125,0xB7);
LCD_WriteReg(0xD126,0x02);
LCD_WriteReg(0xD127,0xCF);
LCD_WriteReg(0xD128,0x02);
LCD_WriteReg(0xD129,0xDE);
LCD_WriteReg(0xD12A,0x02);
LCD_WriteReg(0xD12B,0xF2);
LCD_WriteReg(0xD12C,0x02);
LCD_WriteReg(0xD12D,0xFE);
LCD_WriteReg(0xD12E,0x03);
LCD_WriteReg(0xD12F,0x10);
LCD_WriteReg(0xD130,0x03);
LCD_WriteReg(0xD131,0x33);
LCD_WriteReg(0xD132,0x03);
LCD_WriteReg(0xD133,0x6D);
LCD_WriteReg(0xD200,0x00);
LCD_WriteReg(0xD201,0x33);
LCD_WriteReg(0xD202,0x00);
LCD_WriteReg(0xD203,0x34);
LCD_WriteReg(0xD204,0x00);
LCD_WriteReg(0xD205,0x3A);
LCD_WriteReg(0xD206,0x00);
LCD_WriteReg(0xD207,0x4A);
LCD_WriteReg(0xD208,0x00);
LCD_WriteReg(0xD209,0x5C);
LCD_WriteReg(0xD20A,0x00);
LCD_WriteReg(0xD20B,0x81);
LCD_WriteReg(0xD20C,0x00);
LCD_WriteReg(0xD20D,0xA6);
LCD_WriteReg(0xD20E,0x00);
LCD_WriteReg(0xD20F,0xE5);
LCD_WriteReg(0xD210,0x01);
LCD_WriteReg(0xD211,0x13);
LCD_WriteReg(0xD212,0x01);
LCD_WriteReg(0xD213,0x54);
LCD_WriteReg(0xD214,0x01);
LCD_WriteReg(0xD215,0x82);
LCD_WriteReg(0xD216,0x01);
LCD_WriteReg(0xD217,0xCA);
LCD_WriteReg(0xD218,0x02);
LCD_WriteReg(0xD219,0x00);
LCD_WriteReg(0xD21A,0x02);
LCD_WriteReg(0xD21B,0x01);
LCD_WriteReg(0xD21C,0x02);
LCD_WriteReg(0xD21D,0x34);
LCD_WriteReg(0xD21E,0x02);
LCD_WriteReg(0xD21F,0x67);
LCD_WriteReg(0xD220,0x02);
LCD_WriteReg(0xD221,0x84);
LCD_WriteReg(0xD222,0x02);
LCD_WriteReg(0xD223,0xA4);
LCD_WriteReg(0xD224,0x02);
LCD_WriteReg(0xD225,0xB7);
LCD_WriteReg(0xD226,0x02);
LCD_WriteReg(0xD227,0xCF);
LCD_WriteReg(0xD228,0x02);
LCD_WriteReg(0xD229,0xDE);
LCD_WriteReg(0xD22A,0x02);
LCD_WriteReg(0xD22B,0xF2);
LCD_WriteReg(0xD22C,0x02);
LCD_WriteReg(0xD22D,0xFE);
LCD_WriteReg(0xD22E,0x03);
LCD_WriteReg(0xD22F,0x10);
LCD_WriteReg(0xD230,0x03);
LCD_WriteReg(0xD231,0x33);
LCD_WriteReg(0xD232,0x03);
LCD_WriteReg(0xD233,0x6D);
LCD_WriteReg(0xD300,0x00);
LCD_WriteReg(0xD301,0x33);
LCD_WriteReg(0xD302,0x00);
LCD_WriteReg(0xD303,0x34);
LCD_WriteReg(0xD304,0x00);
LCD_WriteReg(0xD305,0x3A);
LCD_WriteReg(0xD306,0x00);
LCD_WriteReg(0xD307,0x4A);
LCD_WriteReg(0xD308,0x00);
LCD_WriteReg(0xD309,0x5C);
LCD_WriteReg(0xD30A,0x00);
LCD_WriteReg(0xD30B,0x81);
LCD_WriteReg(0xD30C,0x00);
LCD_WriteReg(0xD30D,0xA6);
LCD_WriteReg(0xD30E,0x00);
LCD_WriteReg(0xD30F,0xE5);
LCD_WriteReg(0xD310,0x01);
LCD_WriteReg(0xD311,0x13);
LCD_WriteReg(0xD312,0x01);
LCD_WriteReg(0xD313,0x54);
LCD_WriteReg(0xD314,0x01);
LCD_WriteReg(0xD315,0x82);
LCD_WriteReg(0xD316,0x01);
LCD_WriteReg(0xD317,0xCA);
LCD_WriteReg(0xD318,0x02);
LCD_WriteReg(0xD319,0x00);
LCD_WriteReg(0xD31A,0x02);
LCD_WriteReg(0xD31B,0x01);
LCD_WriteReg(0xD31C,0x02);
LCD_WriteReg(0xD31D,0x34);
LCD_WriteReg(0xD31E,0x02);
LCD_WriteReg(0xD31F,0x67);
LCD_WriteReg(0xD320,0x02);
LCD_WriteReg(0xD321,0x84);
LCD_WriteReg(0xD322,0x02);
LCD_WriteReg(0xD323,0xA4);
LCD_WriteReg(0xD324,0x02);
LCD_WriteReg(0xD325,0xB7);
LCD_WriteReg(0xD326,0x02);
LCD_WriteReg(0xD327,0xCF);
LCD_WriteReg(0xD328,0x02);
LCD_WriteReg(0xD329,0xDE);
LCD_WriteReg(0xD32A,0x02);
LCD_WriteReg(0xD32B,0xF2);
LCD_WriteReg(0xD32C,0x02);
LCD_WriteReg(0xD32D,0xFE);
LCD_WriteReg(0xD32E,0x03);
LCD_WriteReg(0xD32F,0x10);
LCD_WriteReg(0xD330,0x03);
LCD_WriteReg(0xD331,0x33);
LCD_WriteReg(0xD332,0x03);
LCD_WriteReg(0xD333,0x6D);
LCD_WriteReg(0xD400,0x00);
LCD_WriteReg(0xD401,0x33);
LCD_WriteReg(0xD402,0x00);
LCD_WriteReg(0xD403,0x34);
LCD_WriteReg(0xD404,0x00);
LCD_WriteReg(0xD405,0x3A);
LCD_WriteReg(0xD406,0x00);
LCD_WriteReg(0xD407,0x4A);
LCD_WriteReg(0xD408,0x00);
LCD_WriteReg(0xD409,0x5C);
LCD_WriteReg(0xD40A,0x00);
LCD_WriteReg(0xD40B,0x81);
LCD_WriteReg(0xD40C,0x00);
LCD_WriteReg(0xD40D,0xA6);
LCD_WriteReg(0xD40E,0x00);
LCD_WriteReg(0xD40F,0xE5);
LCD_WriteReg(0xD410,0x01);
LCD_WriteReg(0xD411,0x13);
LCD_WriteReg(0xD412,0x01);
LCD_WriteReg(0xD413,0x54);
LCD_WriteReg(0xD414,0x01);
LCD_WriteReg(0xD415,0x82);
LCD_WriteReg(0xD416,0x01);
LCD_WriteReg(0xD417,0xCA);
LCD_WriteReg(0xD418,0x02);
LCD_WriteReg(0xD419,0x00);
LCD_WriteReg(0xD41A,0x02);
LCD_WriteReg(0xD41B,0x01);
LCD_WriteReg(0xD41C,0x02);
LCD_WriteReg(0xD41D,0x34);
LCD_WriteReg(0xD41E,0x02);
LCD_WriteReg(0xD41F,0x67);
LCD_WriteReg(0xD420,0x02);
LCD_WriteReg(0xD421,0x84);
LCD_WriteReg(0xD422,0x02);
LCD_WriteReg(0xD423,0xA4);
LCD_WriteReg(0xD424,0x02);
LCD_WriteReg(0xD425,0xB7);
LCD_WriteReg(0xD426,0x02);
LCD_WriteReg(0xD427,0xCF);
LCD_WriteReg(0xD428,0x02);
LCD_WriteReg(0xD429,0xDE);
LCD_WriteReg(0xD42A,0x02);
LCD_WriteReg(0xD42B,0xF2);
LCD_WriteReg(0xD42C,0x02);
LCD_WriteReg(0xD42D,0xFE);
LCD_WriteReg(0xD42E,0x03);
LCD_WriteReg(0xD42F,0x10);
LCD_WriteReg(0xD430,0x03);
LCD_WriteReg(0xD431,0x33);
LCD_WriteReg(0xD432,0x03);
LCD_WriteReg(0xD433,0x6D);
LCD_WriteReg(0xD500,0x00);
LCD_WriteReg(0xD501,0x33);
LCD_WriteReg(0xD502,0x00);
LCD_WriteReg(0xD503,0x34);
LCD_WriteReg(0xD504,0x00);
LCD_WriteReg(0xD505,0x3A);
LCD_WriteReg(0xD506,0x00);
LCD_WriteReg(0xD507,0x4A);
LCD_WriteReg(0xD508,0x00);
LCD_WriteReg(0xD509,0x5C);
LCD_WriteReg(0xD50A,0x00);
LCD_WriteReg(0xD50B,0x81);
LCD_WriteReg(0xD50C,0x00);
LCD_WriteReg(0xD50D,0xA6);
LCD_WriteReg(0xD50E,0x00);
LCD_WriteReg(0xD50F,0xE5);
LCD_WriteReg(0xD510,0x01);
LCD_WriteReg(0xD511,0x13);
LCD_WriteReg(0xD512,0x01);
LCD_WriteReg(0xD513,0x54);
LCD_WriteReg(0xD514,0x01);
LCD_WriteReg(0xD515,0x82);
LCD_WriteReg(0xD516,0x01);
LCD_WriteReg(0xD517,0xCA);
LCD_WriteReg(0xD518,0x02);
LCD_WriteReg(0xD519,0x00);
LCD_WriteReg(0xD51A,0x02);
LCD_WriteReg(0xD51B,0x01);
LCD_WriteReg(0xD51C,0x02);
LCD_WriteReg(0xD51D,0x34);
LCD_WriteReg(0xD51E,0x02);
LCD_WriteReg(0xD51F,0x67);
LCD_WriteReg(0xD520,0x02);
LCD_WriteReg(0xD521,0x84);
LCD_WriteReg(0xD522,0x02);
LCD_WriteReg(0xD523,0xA4);
LCD_WriteReg(0xD524,0x02);
LCD_WriteReg(0xD525,0xB7);
LCD_WriteReg(0xD526,0x02);
LCD_WriteReg(0xD527,0xCF);
LCD_WriteReg(0xD528,0x02);
LCD_WriteReg(0xD529,0xDE);
LCD_WriteReg(0xD52A,0x02);
LCD_WriteReg(0xD52B,0xF2);
LCD_WriteReg(0xD52C,0x02);
LCD_WriteReg(0xD52D,0xFE);
LCD_WriteReg(0xD52E,0x03);
LCD_WriteReg(0xD52F,0x10);
LCD_WriteReg(0xD530,0x03);
LCD_WriteReg(0xD531,0x33);
LCD_WriteReg(0xD532,0x03);
LCD_WriteReg(0xD533,0x6D);
LCD_WriteReg(0xD600,0x00);
LCD_WriteReg(0xD601,0x33);
LCD_WriteReg(0xD602,0x00);
LCD_WriteReg(0xD603,0x34);
LCD_WriteReg(0xD604,0x00);
LCD_WriteReg(0xD605,0x3A);
LCD_WriteReg(0xD606,0x00);
LCD_WriteReg(0xD607,0x4A);
LCD_WriteReg(0xD608,0x00);
LCD_WriteReg(0xD609,0x5C);
LCD_WriteReg(0xD60A,0x00);
LCD_WriteReg(0xD60B,0x81);
LCD_WriteReg(0xD60C,0x00);
LCD_WriteReg(0xD60D,0xA6);
LCD_WriteReg(0xD60E,0x00);
LCD_WriteReg(0xD60F,0xE5);
LCD_WriteReg(0xD610,0x01);
LCD_WriteReg(0xD611,0x13);
LCD_WriteReg(0xD612,0x01);
LCD_WriteReg(0xD613,0x54);
LCD_WriteReg(0xD614,0x01);
LCD_WriteReg(0xD615,0x82);
LCD_WriteReg(0xD616,0x01);
LCD_WriteReg(0xD617,0xCA);
LCD_WriteReg(0xD618,0x02);
LCD_WriteReg(0xD619,0x00);
LCD_WriteReg(0xD61A,0x02);
LCD_WriteReg(0xD61B,0x01);
LCD_WriteReg(0xD61C,0x02);
LCD_WriteReg(0xD61D,0x34);
LCD_WriteReg(0xD61E,0x02);
LCD_WriteReg(0xD61F,0x67);
LCD_WriteReg(0xD620,0x02);
LCD_WriteReg(0xD621,0x84);
LCD_WriteReg(0xD622,0x02);
LCD_WriteReg(0xD623,0xA4);
LCD_WriteReg(0xD624,0x02);
LCD_WriteReg(0xD625,0xB7);
LCD_WriteReg(0xD626,0x02);
LCD_WriteReg(0xD627,0xCF);
LCD_WriteReg(0xD628,0x02);
LCD_WriteReg(0xD629,0xDE);
LCD_WriteReg(0xD62A,0x02);
LCD_WriteReg(0xD62B,0xF2);
LCD_WriteReg(0xD62C,0x02);
LCD_WriteReg(0xD62D,0xFE);
LCD_WriteReg(0xD62E,0x03);
LCD_WriteReg(0xD62F,0x10);
LCD_WriteReg(0xD630,0x03);
LCD_WriteReg(0xD631,0x33);
LCD_WriteReg(0xD632,0x03);
LCD_WriteReg(0xD633,0x6D);
//LV2 Page 0 enable
LCD_WriteReg(0xF000,0x55);
LCD_WriteReg(0xF001,0xAA);
LCD_WriteReg(0xF002,0x52);
LCD_WriteReg(0xF003,0x08);
LCD_WriteReg(0xF004,0x00);
//Display control
LCD_WriteReg(0xB100, 0xCC);
LCD_WriteReg(0xB101, 0x00);
//Source hold time
LCD_WriteReg(0xB600,0x05);
//Gate EQ control
LCD_WriteReg(0xB700,0x70);
LCD_WriteReg(0xB701,0x70);
//Source EQ control (Mode 2)
LCD_WriteReg(0xB800,0x01);
LCD_WriteReg(0xB801,0x03);
LCD_WriteReg(0xB802,0x03);
LCD_WriteReg(0xB803,0x03);
//Inversion mode (2-dot)
LCD_WriteReg(0xBC00,0x02);
LCD_WriteReg(0xBC01,0x00);
LCD_WriteReg(0xBC02,0x00);
//Timing control 4H w/ 4-delay
LCD_WriteReg(0xC900,0xD0);
LCD_WriteReg(0xC901,0x02);
LCD_WriteReg(0xC902,0x50);
LCD_WriteReg(0xC903,0x50);
LCD_WriteReg(0xC904,0x50);
LCD_WriteReg(0x3500,0x00);
LCD_WriteReg(0x3A00,0x55); //16-bit/pixel
LCD_WR_REG(0x1100);
delay_us(120);
LCD_WR_REG(0x2900);
}else if(lcddev.id==0x9325)//9325
{
LCD_WriteReg(0x00E5,0x78F0);
LCD_WriteReg(0x0001,0x0100);
LCD_WriteReg(0x0002,0x0700);
LCD_WriteReg(0x0003,0x1030);
LCD_WriteReg(0x0004,0x0000);
LCD_WriteReg(0x0008,0x0202);
LCD_WriteReg(0x0009,0x0000);
LCD_WriteReg(0x000A,0x0000);
LCD_WriteReg(0x000C,0x0000);
LCD_WriteReg(0x000D,0x0000);
LCD_WriteReg(0x000F,0x0000);
//power on sequence VGHVGL
LCD_WriteReg(0x0010,0x0000);
LCD_WriteReg(0x0011,0x0007);
LCD_WriteReg(0x0012,0x0000);
LCD_WriteReg(0x0013,0x0000);
LCD_WriteReg(0x0007,0x0000);
//vgh
LCD_WriteReg(0x0010,0x1690);
LCD_WriteReg(0x0011,0x0227);
//delayms(100);
//vregiout
LCD_WriteReg(0x0012,0x009D); //0x001b
//delayms(100);
//vom amplitude
LCD_WriteReg(0x0013,0x1900);
//delayms(100);
//vom H
LCD_WriteReg(0x0029,0x0025);
LCD_WriteReg(0x002B,0x000D);
//gamma
LCD_WriteReg(0x0030,0x0007);
LCD_WriteReg(0x0031,0x0303);
LCD_WriteReg(0x0032,0x0003);// 0006
LCD_WriteReg(0x0035,0x0206);
LCD_WriteReg(0x0036,0x0008);
LCD_WriteReg(0x0037,0x0406);
LCD_WriteReg(0x0038,0x0304);//0200
LCD_WriteReg(0x0039,0x0007);
LCD_WriteReg(0x003C,0x0602);// 0504
LCD_WriteReg(0x003D,0x0008);
//ram
LCD_WriteReg(0x0050,0x0000);
LCD_WriteReg(0x0051,0x00EF);
LCD_WriteReg(0x0052,0x0000);
LCD_WriteReg(0x0053,0x013F);
LCD_WriteReg(0x0060,0xA700);
LCD_WriteReg(0x0061,0x0001);
LCD_WriteReg(0x006A,0x0000);
//
LCD_WriteReg(0x0080,0x0000);
LCD_WriteReg(0x0081,0x0000);
LCD_WriteReg(0x0082,0x0000);
LCD_WriteReg(0x0083,0x0000);
LCD_WriteReg(0x0084,0x0000);
LCD_WriteReg(0x0085,0x0000);
//
LCD_WriteReg(0x0090,0x0010);
LCD_WriteReg(0x0092,0x0600);
LCD_WriteReg(0x0007,0x0133);
LCD_WriteReg(0x00,0x0022);//
}else if(lcddev.id==0x9328)//ILI9328 OK
{
LCD_WriteReg(0x00EC,0x108F);// internal timeing
LCD_WriteReg(0x00EF,0x1234);// ADD
//LCD_WriteReg(0x00e7,0x0010);
//LCD_WriteReg(0x0000,0x0001);//開啟內部時鐘
LCD_WriteReg(0x0001,0x0100);
LCD_WriteReg(0x0002,0x0700);//電源開啟
//LCD_WriteReg(0x0003,(1<<3)|(1<<4) ); //65K RGB
//DRIVE TABLE(寄存器 03H)
//BIT3=AM BIT4:5=ID0:1
//AM ID0 ID1 FUNCATION
// 0 0 0 R->L D->U
// 1 0 0 D->U R->L
// 0 1 0 L->R D->U
// 1 1 0 D->U L->R
// 0 0 1 R->L U->D
// 1 0 1 U->D R->L
// 0 1 1 L->R U->D 正常就用這個.
// 1 1 1 U->D L->R
LCD_WriteReg(0x0003,(1<<12)|(3<<4)|(0<<3) );//65K
LCD_WriteReg(0x0004,0x0000);
LCD_WriteReg(0x0008,0x0202);
LCD_WriteReg(0x0009,0x0000);
LCD_WriteReg(0x000a,0x0000);//display setting
LCD_WriteReg(0x000c,0x0001);//display setting
LCD_WriteReg(0x000d,0x0000);//0f3c
LCD_WriteReg(0x000f,0x0000);
//電源配置
LCD_WriteReg(0x0010,0x0000);
LCD_WriteReg(0x0011,0x0007);
LCD_WriteReg(0x0012,0x0000);
LCD_WriteReg(0x0013,0x0000);
LCD_WriteReg(0x0007,0x0001);
delay_ms(50);
LCD_WriteReg(0x0010,0x1490);
LCD_WriteReg(0x0011,0x0227);
delay_ms(50);
LCD_WriteReg(0x0012,0x008A);
delay_ms(50);
LCD_WriteReg(0x0013,0x1a00);
LCD_WriteReg(0x0029,0x0006);
LCD_WriteReg(0x002b,0x000d);
delay_ms(50);
LCD_WriteReg(0x0020,0x0000);
LCD_WriteReg(0x0021,0x0000);
delay_ms(50);
//伽馬校正
LCD_WriteReg(0x0030,0x0000);
LCD_WriteReg(0x0031,0x0604);
LCD_WriteReg(0x0032,0x0305);
LCD_WriteReg(0x0035,0x0000);
LCD_WriteReg(0x0036,0x0C09);
LCD_WriteReg(0x0037,0x0204);
LCD_WriteReg(0x0038,0x0301);
LCD_WriteReg(0x0039,0x0707);
LCD_WriteReg(0x003c,0x0000);
LCD_WriteReg(0x003d,0x0a0a);
delay_ms(50);
LCD_WriteReg(0x0050,0x0000); //水平GRAM起始位置
LCD_WriteReg(0x0051,0x00ef); //水平GRAM終止位置
LCD_WriteReg(0x0052,0x0000); //垂直GRAM起始位置
LCD_WriteReg(0x0053,0x013f); //垂直GRAM終止位置
LCD_WriteReg(0x0060,0xa700);
LCD_WriteReg(0x0061,0x0001);
LCD_WriteReg(0x006a,0x0000);
LCD_WriteReg(0x0080,0x0000);
LCD_WriteReg(0x0081,0x0000);
LCD_WriteReg(0x0082,0x0000);
LCD_WriteReg(0x0083,0x0000);
LCD_WriteReg(0x0084,0x0000);
LCD_WriteReg(0x0085,0x0000);
LCD_WriteReg(0x0090,0x0010);
LCD_WriteReg(0x0092,0x0600);
//開啟顯示設置
LCD_WriteReg(0x0007,0x0133);
}else if(lcddev.id==0x9320)//測試OK.
{
LCD_WriteReg(0x00,0x0000);
LCD_WriteReg(0x01,0x0100); //Driver Output Contral.
LCD_WriteReg(0x02,0x0700); //LCD Driver Waveform Contral.
LCD_WriteReg(0x03,0x1030);//Entry Mode Set.
//LCD_WriteReg(0x03,0x1018); //Entry Mode Set.
LCD_WriteReg(0x04,0x0000); //Scalling Contral.
LCD_WriteReg(0x08,0x0202); //Display Contral 2.(0x0207)
LCD_WriteReg(0x09,0x0000); //Display Contral 3.(0x0000)
LCD_WriteReg(0x0a,0x0000); //Frame Cycle Contal.(0x0000)
LCD_WriteReg(0x0c,(1<<0)); //Extern Display Interface Contral 1.(0x0000)
LCD_WriteReg(0x0d,0x0000); //Frame Maker Position.
LCD_WriteReg(0x0f,0x0000); //Extern Display Interface Contral 2.
delay_ms(50);
LCD_WriteReg(0x07,0x0101); //Display Contral.
delay_ms(50);
LCD_WriteReg(0x10,(1<<12)|(0<<8)|(1<<7)|(1<<6)|(0<<4)); //Power Control 1.(0x16b0)
LCD_WriteReg(0x11,0x0007); //Power Control 2.(0x0001)
LCD_WriteReg(0x12,(1<<8)|(1<<4)|(0<<0)); //Power Control 3.(0x0138)
LCD_WriteReg(0x13,0x0b00); //Power Control 4.
LCD_WriteReg(0x29,0x0000); //Power Control 7.
LCD_WriteReg(0x2b,(1<<14)|(1<<4));
LCD_WriteReg(0x50,0); //Set X Star
//水平GRAM終止位置Set X End.
LCD_WriteReg(0x51,239); //Set Y Star
LCD_WriteReg(0x52,0); //Set Y End.t.
LCD_WriteReg(0x53,319); //
LCD_WriteReg(0x60,0x2700); //Driver Output Control.
LCD_WriteReg(0x61,0x0001); //Driver Output Control.
LCD_WriteReg(0x6a,0x0000); //Vertical Srcoll Control.
LCD_WriteReg(0x80,0x0000); //Display Position? Partial Display 1.
LCD_WriteReg(0x81,0x0000); //RAM Address Start? Partial Display 1.
LCD_WriteReg(0x82,0x0000); //RAM Address End-Partial Display 1.
LCD_WriteReg(0x83,0x0000); //Displsy Position? Partial Display 2.
LCD_WriteReg(0x84,0x0000); //RAM Address Start? Partial Display 2.
LCD_WriteReg(0x85,0x0000); //RAM Address End? Partial Display 2.
LCD_WriteReg(0x90,(0<<7)|(16<<0)); //Frame Cycle Contral.(0x0013)
LCD_WriteReg(0x92,0x0000); //Panel Interface Contral 2.(0x0000)
LCD_WriteReg(0x93,0x0001); //Panel Interface Contral 3.
LCD_WriteReg(0x95,0x0110); //Frame Cycle Contral.(0x0110)
LCD_WriteReg(0x97,(0<<8)); //
LCD_WriteReg(0x98,0x0000); //Frame Cycle Contral.
LCD_WriteReg(0x07,0x0173); //(0x0173)
}else if(lcddev.id==0X9331)//OK |/|/|
{
LCD_WriteReg(0x00E7, 0x1014);
LCD_WriteReg(0x0001, 0x0100); // set SS and SM bit
LCD_WriteReg(0x0002, 0x0200); // set 1 line inversion
LCD_WriteReg(0x0003,(1<<12)|(3<<4)|(1<<3));//65K
//LCD_WriteReg(0x0003, 0x1030); // set GRAM write direction and BGR=1.
LCD_WriteReg(0x0008, 0x0202); // set the back porch and front porch
LCD_WriteReg(0x0009, 0x0000); // set non-display area refresh cycle ISC[3:0]
LCD_WriteReg(0x000A, 0x0000); // FMARK function
LCD_WriteReg(0x000C, 0x0000); // RGB interface setting
LCD_WriteReg(0x000D, 0x0000); // Frame marker Position
LCD_WriteReg(0x000F, 0x0000); // RGB interface polarity
//*************Power On sequence ****************//
LCD_WriteReg(0x0010, 0x0000); // SAP, BT[3:0], AP, DSTB, SLP, STB
LCD_WriteReg(0x0011, 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
LCD_WriteReg(0x0012, 0x0000); // VREG1OUT voltage
LCD_WriteReg(0x0013, 0x0000); // VDV[4:0] for VCOM amplitude
delay_ms(200); // Dis-charge capacitor power voltage
LCD_WriteReg(0x0010, 0x1690); // SAP, BT[3:0], AP, DSTB, SLP, STB
LCD_WriteReg(0x0011, 0x0227); // DC1[2:0], DC0[2:0], VC[2:0]
delay_ms(50); // Delay 50ms
LCD_WriteReg(0x0012, 0x000C); // Internal reference voltage= Vci;
delay_ms(50); // Delay 50ms
LCD_WriteReg(0x0013, 0x0800); // Set VDV[4:0] for VCOM amplitude
LCD_WriteReg(0x0029, 0x0011); // Set VCM[5:0] for VCOMH
LCD_WriteReg(0x002B, 0x000B); // Set Frame Rate
delay_ms(50); // Delay 50ms
LCD_WriteReg(0x0020, 0x0000); // GRAM horizontal Address
LCD_WriteReg(0x0021, 0x013f); // GRAM Vertical Address
// ----------- Adjust the Gamma Curve ----------//
LCD_WriteReg(0x0030, 0x0000);
LCD_WriteReg(0x0031, 0x0106);
LCD_WriteReg(0x0032, 0x0000);
LCD_WriteReg(0x0035, 0x0204);
LCD_WriteReg(0x0036, 0x160A);
LCD_WriteReg(0x0037, 0x0707);
LCD_WriteReg(0x0038, 0x0106);
LCD_WriteReg(0x0039, 0x0707);
LCD_WriteReg(0x003C, 0x0402);
LCD_WriteReg(0x003D, 0x0C0F);
//------------------ Set GRAM area ---------------//
LCD_WriteReg(0x0050, 0x0000); // Horizontal GRAM Start Address
LCD_WriteReg(0x0051, 0x00EF); // Horizontal GRAM End Address
LCD_WriteReg(0x0052, 0x0000); // Vertical GRAM Start Address
LCD_WriteReg(0x0053, 0x013F); // Vertical GRAM Start Address
LCD_WriteReg(0x0060, 0x2700); // Gate Scan Line
LCD_WriteReg(0x0061, 0x0001); // NDL,VLE, REV
LCD_WriteReg(0x006A, 0x0000); // set scrolling line
//-------------- Partial Display Control ---------//
LCD_WriteReg(0x0080, 0x0000);
LCD_WriteReg(0x0081, 0x0000);
LCD_WriteReg(0x0082, 0x0000);
LCD_WriteReg(0x0083, 0x0000);
LCD_WriteReg(0x0084, 0x0000);
LCD_WriteReg(0x0085, 0x0000);
//-------------- Panel Control -------------------//
LCD_WriteReg(0x0090, 0x0010);
LCD_WriteReg(0x0092, 0x0600);
LCD_WriteReg(0x0007, 0x0133); // 262K color and display ON
}else if(lcddev.id==0x5408)
{
LCD_WriteReg(0x01,0x0100);
LCD_WriteReg(0x02,0x0700);//LCD Driving Waveform Contral
LCD_WriteReg(0x03,0x1030);//Entry Mode設置
//指針從左至右自上而下的自動增模式
//Normal Mode(Window Mode disable)
//RGB格式
//16位數據2次傳輸的8總線設置
LCD_WriteReg(0x04,0x0000); //Scalling Control register
LCD_WriteReg(0x08,0x0207); //Display Control 2
LCD_WriteReg(0x09,0x0000); //Display Control 3
LCD_WriteReg(0x0A,0x0000); //Frame Cycle Control
LCD_WriteReg(0x0C,0x0000); //External Display Interface Control 1
LCD_WriteReg(0x0D,0x0000); //Frame Maker Position
LCD_WriteReg(0x0F,0x0000); //External Display Interface Control 2
delay_ms(20);
//TFT 液晶彩色圖像顯示方法14
LCD_WriteReg(0x10,0x16B0); //0x14B0 //Power Control 1
LCD_WriteReg(0x11,0x0001); //0x0007 //Power Control 2
LCD_WriteReg(0x17,0x0001); //0x0000 //Power Control 3
LCD_WriteReg(0x12,0x0138); //0x013B //Power Control 4
LCD_WriteReg(0x13,0x0800); //0x0800 //Power Control 5
LCD_WriteReg(0x29,0x0009); //NVM read data 2
LCD_WriteReg(0x2a,0x0009); //NVM read data 3
LCD_WriteReg(0xa4,0x0000);
LCD_WriteReg(0x50,0x0000); //設置操作窗口的X軸開始列
LCD_WriteReg(0x51,0x00EF); //設置操作窗口的X軸結束列
LCD_WriteReg(0x52,0x0000); //設置操作窗口的Y軸開始行
LCD_WriteReg(0x53,0x013F); //設置操作窗口的Y軸結束行
LCD_WriteReg(0x60,0x2700); //Driver Output Control
//設置屏幕的點數以及掃描的起始行
LCD_WriteReg(0x61,0x0001); //Driver Output Control
LCD_WriteReg(0x6A,0x0000); //Vertical Scroll Control
LCD_WriteReg(0x80,0x0000); //Display Position – Partial Display 1
LCD_WriteReg(0x81,0x0000); //RAM Address Start – Partial Display 1
LCD_WriteReg(0x82,0x0000); //RAM address End - Partial Display 1
LCD_WriteReg(0x83,0x0000); //Display Position – Partial Display 2
LCD_WriteReg(0x84,0x0000); //RAM Address Start – Partial Display 2
LCD_WriteReg(0x85,0x0000); //RAM address End – Partail Display2
LCD_WriteReg(0x90,0x0013); //Frame Cycle Control
LCD_WriteReg(0x92,0x0000); //Panel Interface Control 2
LCD_WriteReg(0x93,0x0003); //Panel Interface control 3
LCD_WriteReg(0x95,0x0110); //Frame Cycle Control
LCD_WriteReg(0x07,0x0173);
delay_ms(50);
}
else if(lcddev.id==0x1505)//OK
{
// second release on 3/5 ,luminance is acceptable,water wave appear during camera preview
LCD_WriteReg(0x0007,0x0000);
delay_ms(50);
LCD_WriteReg(0x0012,0x011C);//0x011A why need to set several times?
LCD_WriteReg(0x00A4,0x0001);//NVM
LCD_WriteReg(0x0008,0x000F);
LCD_WriteReg(0x000A,0x0008);
LCD_WriteReg(0x000D,0x0008);
//伽馬校正
LCD_WriteReg(0x0030,0x0707);
LCD_WriteReg(0x0031,0x0007); //0x0707
LCD_WriteReg(0x0032,0x0603);
LCD_WriteReg(0x0033,0x0700);
LCD_WriteReg(0x0034,0x0202);
LCD_WriteReg(0x0035,0x0002); //?0x0606
LCD_WriteReg(0x0036,0x1F0F);
LCD_WriteReg(0x0037,0x0707); //0x0f0f 0x0105
LCD_WriteReg(0x0038,0x0000);
LCD_WriteReg(0x0039,0x0000);
LCD_WriteReg(0x003A,0x0707);
LCD_WriteReg(0x003B,0x0000); //0x0303
LCD_WriteReg(0x003C,0x0007); //?0x0707
LCD_WriteReg(0x003D,0x0000); //0x1313//0x1f08
delay_ms(50);
LCD_WriteReg(0x0007,0x0001);
LCD_WriteReg(0x0017,0x0001);//開啟電源
delay_ms(50);
//電源配置
LCD_WriteReg(0x0010,0x17A0);
LCD_WriteReg(0x0011,0x0217);//reference voltage VC[2:0] Vciout = 1.00*Vcivl
LCD_WriteReg(0x0012,0x011E);//0x011c //Vreg1out = Vcilvl*1.80 is it the same as Vgama1out ?
LCD_WriteReg(0x0013,0x0F00);//VDV[4:0]-->VCOM Amplitude VcomL = VcomH - Vcom Ampl
LCD_WriteReg(0x002A,0x0000);
LCD_WriteReg(0x0029,0x000A);//0x0001F Vcomh = VCM1[4:0]*Vreg1out gate source voltage??
LCD_WriteReg(0x0012,0x013E);// 0x013C power supply on
//Coordinates Control//
LCD_WriteReg(0x0050,0x0000);//0x0e00
LCD_WriteReg(0x0051,0x00EF);
LCD_WriteReg(0x0052,0x0000);
LCD_WriteReg(0x0053,0x013F);
//Pannel Image Control//
LCD_WriteReg(0x0060,0x2700);
LCD_WriteReg(0x0061,0x0001);
LCD_WriteReg(0x006A,0x0000);
LCD_WriteReg(0x0080,0x0000);
//Partial Image Control//
LCD_WriteReg(0x0081,0x0000);
LCD_WriteReg(0x0082,0x0000);
LCD_WriteReg(0x0083,0x0000);
LCD_WriteReg(0x0084,0x0000);
LCD_WriteReg(0x0085,0x0000);
//Panel Interface Control//
LCD_WriteReg(0x0090,0x0013);//0x0010 frenqucy
LCD_WriteReg(0x0092,0x0300);
LCD_WriteReg(0x0093,0x0005);
LCD_WriteReg(0x0095,0x0000);
LCD_WriteReg(0x0097,0x0000);
LCD_WriteReg(0x0098,0x0000);
LCD_WriteReg(0x0001,0x0100);
LCD_WriteReg(0x0002,0x0700);
LCD_WriteReg(0x0003,0x1038);//掃描方向上->下左->右
LCD_WriteReg(0x0004,0x0000);
LCD_WriteReg(0x000C,0x0000);
LCD_WriteReg(0x000F,0x0000);
LCD_WriteReg(0x0020,0x0000);
LCD_WriteReg(0x0021,0x0000);
LCD_WriteReg(0x0007,0x0021);
delay_ms(20);
LCD_WriteReg(0x0007,0x0061);
delay_ms(20);
LCD_WriteReg(0x0007,0x0173);
delay_ms(20);
}else if(lcddev.id==0xB505)
{
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x00a4,0x0001);
delay_ms(20);
LCD_WriteReg(0x0060,0x2700);
LCD_WriteReg(0x0008,0x0202);
LCD_WriteReg(0x0030,0x0214);
LCD_WriteReg(0x0031,0x3715);
LCD_WriteReg(0x0032,0x0604);
LCD_WriteReg(0x0033,0x0e16);
LCD_WriteReg(0x0034,0x2211);
LCD_WriteReg(0x0035,0x1500);
LCD_WriteReg(0x0036,0x8507);
LCD_WriteReg(0x0037,0x1407);
LCD_WriteReg(0x0038,0x1403);
LCD_WriteReg(0x0039,0x0020);
LCD_WriteReg(0x0090,0x001a);
LCD_WriteReg(0x0010,0x0000);
LCD_WriteReg(0x0011,0x0007);
LCD_WriteReg(0x0012,0x0000);
LCD_WriteReg(0x0013,0x0000);
delay_ms(20);
LCD_WriteReg(0x0010,0x0730);
LCD_WriteReg(0x0011,0x0137);
delay_ms(20);
LCD_WriteReg(0x0012,0x01b8);
delay_ms(20);
LCD_WriteReg(0x0013,0x0f00);
LCD_WriteReg(0x002a,0x0080);
LCD_WriteReg(0x0029,0x0048);
delay_ms(20);
LCD_WriteReg(0x0001,0x0100);
LCD_WriteReg(0x0002,0x0700);
LCD_WriteReg(0x0003,0x1038);//掃描方向上->下左->右
LCD_WriteReg(0x0008,0x0202);
LCD_WriteReg(0x000a,0x0000);
LCD_WriteReg(0x000c,0x0000);
LCD_WriteReg(0x000d,0x0000);
LCD_WriteReg(0x000e,0x0030);
LCD_WriteReg(0x0050,0x0000);
LCD_WriteReg(0x0051,0x00ef);
LCD_WriteReg(0x0052,0x0000);
LCD_WriteReg(0x0053,0x013f);
LCD_WriteReg(0x0060,0x2700);
LCD_WriteReg(0x0061,0x0001);
LCD_WriteReg(0x006a,0x0000);
//LCD_WriteReg(0x0080,0x0000);
//LCD_WriteReg(0x0081,0x0000);
LCD_WriteReg(0x0090,0X0011);
LCD_WriteReg(0x0092,0x0600);
LCD_WriteReg(0x0093,0x0402);
LCD_WriteReg(0x0094,0x0002);
delay_ms(20);
LCD_WriteReg(0x0007,0x0001);
delay_ms(20);
LCD_WriteReg(0x0007,0x0061);
LCD_WriteReg(0x0007,0x0173);
LCD_WriteReg(0x0020,0x0000);
LCD_WriteReg(0x0021,0x0000);
LCD_WriteReg(0x00,0x22);
}else if(lcddev.id==0xC505)
{
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x0000,0x0000);
delay_ms(20);
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x0000,0x0000);
LCD_WriteReg(0x00a4,0x0001);
delay_ms(20);
LCD_WriteReg(0x0060,0x2700);
LCD_WriteReg(0x0008,0x0806);
LCD_WriteReg(0x0030,0x0703);//gamma setting
LCD_WriteReg(0x0031,0x0001);
LCD_WriteReg(0x0032,0x0004);
LCD_WriteReg(0x0033,0x0102);
LCD_WriteReg(0x0034,0x0300);
LCD_WriteReg(0x0035,0x0103);
LCD_WriteReg(0x0036,0x001F);
LCD_WriteReg(0x0037,0x0703);
LCD_WriteReg(0x0038,0x0001);
LCD_WriteReg(0x0039,0x0004);
LCD_WriteReg(0x0090, 0x0015); //80Hz
LCD_WriteReg(0x0010, 0X0410); //BT,AP
LCD_WriteReg(0x0011,0x0247); //DC1,DC0,VC
LCD_WriteReg(0x0012, 0x01BC);
LCD_WriteReg(0x0013, 0x0e00);
delay_ms(120);
LCD_WriteReg(0x0001, 0x0100);
LCD_WriteReg(0x0002, 0x0200);
LCD_WriteReg(0x0003, 0x1030);
LCD_WriteReg(0x000A, 0x0008);
LCD_WriteReg(0x000C, 0x0000);
LCD_WriteReg(0x000E, 0x0020);
LCD_WriteReg(0x000F, 0x0000);
LCD_WriteReg(0x0020, 0x0000); //H Start
LCD_WriteReg(0x0021, 0x0000); //V Start
LCD_WriteReg(0x002A,0x003D); //vcom2
delay_ms(20);
LCD_WriteReg(0x0029, 0x002d);
LCD_WriteReg(0x0050, 0x0000);
LCD_WriteReg(0x0051, 0xD0EF);
LCD_WriteReg(0x0052, 0x0000);
LCD_WriteReg(0x0053, 0x013F);
LCD_WriteReg(0x0061, 0x0000);
LCD_WriteReg(0x006A, 0x0000);
LCD_WriteReg(0x0092,0x0300);
LCD_WriteReg(0x0093, 0x0005);
LCD_WriteReg(0x0007, 0x0100);
}else if(lcddev.id==0x4531)//OK |/|/|
{
LCD_WriteReg(0X00,0X0001);
delay_ms(10);
LCD_WriteReg(0X10,0X1628);
LCD_WriteReg(0X12,0X000e);//0x0006
LCD_WriteReg(0X13,0X0A39);
delay_ms(10);
LCD_WriteReg(0X11,0X0040);
LCD_WriteReg(0X15,0X0050);
delay_ms(10);
LCD_WriteReg(0X12,0X001e);//16
delay_ms(10);
LCD_WriteReg(0X10,0X1620);
LCD_WriteReg(0X13,0X2A39);
delay_ms(10);
LCD_WriteReg(0X01,0X0100);
LCD_WriteReg(0X02,0X0300);
LCD_WriteReg(0X03,0X1038);//改變方向的
LCD_WriteReg(0X08,0X0202);
LCD_WriteReg(0X0A,0X0008);
LCD_WriteReg(0X30,0X0000);
LCD_WriteReg(0X31,0X0402);
LCD_WriteReg(0X32,0X0106);
LCD_WriteReg(0X33,0X0503);
LCD_WriteReg(0X34,0X0104);
LCD_WriteReg(0X35,0X0301);
LCD_WriteReg(0X36,0X0707);
LCD_WriteReg(0X37,0X0305);
LCD_WriteReg(0X38,0X0208);
LCD_WriteReg(0X39,0X0F0B);
LCD_WriteReg(0X41,0X0002);
LCD_WriteReg(0X60,0X2700);
LCD_WriteReg(0X61,0X0001);
LCD_WriteReg(0X90,0X0210);
LCD_WriteReg(0X92,0X010A);
LCD_WriteReg(0X93,0X0004);
LCD_WriteReg(0XA0,0X0100);
LCD_WriteReg(0X07,0X0001);
LCD_WriteReg(0X07,0X0021);
LCD_WriteReg(0X07,0X0023);
LCD_WriteReg(0X07,0X0033);
LCD_WriteReg(0X07,0X0133);
LCD_WriteReg(0XA0,0X0000);
}else if(lcddev.id==0x4535)
{
LCD_WriteReg(0X15,0X0030);
LCD_WriteReg(0X9A,0X0010);
LCD_WriteReg(0X11,0X0020);
LCD_WriteReg(0X10,0X3428);
LCD_WriteReg(0X12,0X0002);//16
LCD_WriteReg(0X13,0X1038);
delay_ms(40);
LCD_WriteReg(0X12,0X0012);//16
delay_ms(40);
LCD_WriteReg(0X10,0X3420);
LCD_WriteReg(0X13,0X3038);
delay_ms(70);
LCD_WriteReg(0X30,0X0000);
LCD_WriteReg(0X31,0X0402);
LCD_WriteReg(0X32,0X0307);
LCD_WriteReg(0X33,0X0304);
LCD_WriteReg(0X34,0X0004);
LCD_WriteReg(0X35,0X0401);
LCD_WriteReg(0X36,0X0707);
LCD_WriteReg(0X37,0X0305);
LCD_WriteReg(0X38,0X0610);
LCD_WriteReg(0X39,0X0610);
LCD_WriteReg(0X01,0X0100);
LCD_WriteReg(0X02,0X0300);
LCD_WriteReg(0X03,0X1030);//改變方向的
LCD_WriteReg(0X08,0X0808);
LCD_WriteReg(0X0A,0X0008);
LCD_WriteReg(0X60,0X2700);
LCD_WriteReg(0X61,0X0001);
LCD_WriteReg(0X90,0X013E);
LCD_WriteReg(0X92,0X0100);
LCD_WriteReg(0X93,0X0100);
LCD_WriteReg(0XA0,0X3000);
LCD_WriteReg(0XA3,0X0010);
LCD_WriteReg(0X07,0X0001);
LCD_WriteReg(0X07,0X0021);
LCD_WriteReg(0X07,0X0023);
LCD_WriteReg(0X07,0X0033);
LCD_WriteReg(0X07,0X0133);
}else if(lcddev.id==0X1963)
{
LCD_WR_REG(0xE2); //Set PLL with OSC = 10MHz (hardware), Multiplier N = 35, 250MHz < VCO < 800MHz = OSC*(N+1), VCO = 300MHz
LCD_WR_DATA(0x1D); //參數1
LCD_WR_DATA(0x02); //參數2 Divider M = 2, PLL = 300/(M+1) = 100MHz
LCD_WR_DATA(0x04); //參數3 Validate M and N values
delay_us(100);
LCD_WR_REG(0xE0); // Start PLL command
LCD_WR_DATA(0x01); // enable PLL
delay_ms(10);
LCD_WR_REG(0xE0); // Start PLL command again
LCD_WR_DATA(0x03); // now, use PLL output as system clock
delay_ms(12);
LCD_WR_REG(0x01); //軟復位
delay_ms(10);
LCD_WR_REG(0xE6); //設置像素頻率,33Mhz
LCD_WR_DATA(0x2F);
LCD_WR_DATA(0xFF);
LCD_WR_DATA(0xFF);
LCD_WR_REG(0xB0); //設置LCD模式
LCD_WR_DATA(0x20); //24位模式
LCD_WR_DATA(0x00); //TFT 模式
LCD_WR_DATA((SSD_HOR_RESOLUTION-1)>>8);//設置LCD水平像素
LCD_WR_DATA(SSD_HOR_RESOLUTION-1);
LCD_WR_DATA((SSD_VER_RESOLUTION-1)>>8);//設置LCD垂直像素
LCD_WR_DATA(SSD_VER_RESOLUTION-1);
LCD_WR_DATA(0x00); //RGB序列
LCD_WR_REG(0xB4); //Set horizontal period
LCD_WR_DATA((SSD_HT-1)>>8);
LCD_WR_DATA(SSD_HT-1);
LCD_WR_DATA(SSD_HPS>>8);
LCD_WR_DATA(SSD_HPS);
LCD_WR_DATA(SSD_HOR_PULSE_WIDTH-1);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_DATA(0x00);
LCD_WR_REG(0xB6); //Set vertical period
LCD_WR_DATA((SSD_VT-1)>>8);
LCD_WR_DATA(SSD_VT-1);
LCD_WR_DATA(SSD_VPS>>8);
LCD_WR_DATA(SSD_VPS);
LCD_WR_DATA(SSD_VER_FRONT_PORCH-1);
LCD_WR_DATA(0x00);
……………………
…………限于本文篇幅余下代碼請從51黑下載附件…………